But who would have thought that in just one meal, the killing point would go from 3,200 to 4,000.
Among them, more than 700 killing points were all contributed by the group of puppet soldiers who came to inquire for information, but for them.
The launch of the 88mm anti-aircraft gun will take a few more days. Thinking of this, Su Bei directly waved his hand.
"System, purchase a complete set of 88mm anti-aircraft gun technical drawings."
"Ding~ The purchase was successful, 3,700 kill points were deducted, and the relevant technical drawings have been placed in the system space."
As soon as he finished speaking, four technical drawings appeared in the system space. They were the technical drawings of the complete set of 88mm anti-aircraft guns that Subei had just purchased.
Among them are the production drawings of the 88mm anti-aircraft gun, its machine tool production drawings, artillery shell drawings and equipment drawings for making its artillery shells.
Now all that is left is machine tools and equipment. As long as these two things are in place, the production of this 88mm anti-aircraft gun can begin.
However, the output of this artillery is definitely not very high. Like the M1 Garand rifle, one machine tool can produce one, twenty or even twenty or thirty rifles per day.
As for the DP light machine gun, one machine tool can only produce two light machine guns per day, and its output is only one-tenth of the output of the M1 Garand rifle.
Not surprisingly, the output of this 88mm anti-aircraft gun is lower, which Su Bei thinks is normal.
The more advanced weapons and equipment, the more troublesome the production process is, and correspondingly, the lower the output.
Immediately afterwards, Su Bei began to understand these four technical drawings with the help of the system and full-level comprehension.
This time it took half an hour to fully understand these four technical drawings. It can only be said that as the weapons become more and more advanced.
It takes longer and longer to understand the details and steps of these technical drawings, like the DP light machine gun.
It took less than five minutes to thoroughly understand its four technical drawings. The current 88mm anti-aircraft gun took half an hour.
In terms of time, it was six times longer than the DP light machine gun. Putting down the technical drawings in his hands, Su Bei rubbed his swollen brain.
"Oh, I finally finished reading it. Next, let's look at the chief's side."
Now the leader needs to get advanced machine tools or materials for making machine tools, and then production can begin.
After purchasing this 88mm anti-aircraft gun, Su Bei began to think about which weapon to buy in the future.
His previous idea was to purchase anti-aircraft guns and anti-tank guns together, but he changed his mind.
With the 88mm anti-aircraft gun in hand, there is no need to waste that killing spot on purchasing technical blueprints for anti-tank guns.
As for these little Japanese tanks, one shot from the 88mm anti-aircraft cannon can directly destroy them, so there is no need to buy special anti-tank guns.
After all, the price of an anti-tank gun is not cheap. It requires a full 2,500 kill points, which is only 500 points cheaper than an 88mm anti-aircraft gun.
And this is just the technical drawing of a single anti-tank gun. If the entire set of technical drawings are taken into account, the price will be at least 3,000 yuan.
............
Obviously it's not worthwhile. With 3,000 killing points, even Northern Jiangsu can buy the MG42 general machine gun. The price of this general machine gun is only 2,000 killing points.
Or you can also buy a heavy machine gun. The price of a heavy machine gun is only 1,200 kill points, even with an increase of 500 points.
To purchase a complete set of light machine gun technical drawings, it only requires 1,700 killing points, so now Subei is struggling.
Should I buy a heavy machine gun as my next weapon, or go straight to the MG42 general machine gun in one step? The biggest feature of this general machine gun is.
It can be used as both a light machine gun and a heavy machine gun, and it also has the characteristics of an anti-aircraft machine gun. It can only be said that if you buy the MG42 general machine gun in one step.
Then there is no need to buy technical drawings of heavy machine guns in the future, but there is another problem. If you want to buy the MG42 general machine gun.
Then the DP light machine gun will be eliminated. Of course, it certainly does not mean that it will be completely replaced, but the MG42 general machine gun will replace the DP light machine gun.
It became the first choice machine gun of the Eighth Route Army, but this DP light machine gun was only released not long ago, and it was a bit wasteful to be eliminated so quickly.
It is precisely because of this that Su Bei has never considered which type of weapon to buy next.
After thinking about it, there was no decision, so Su Bei put aside this idea for the time being and prepared to produce the 88mm anti-aircraft gun first.
As for the rest, we will see step by step later. Maybe some things will suddenly make Su Bei make a decision later on.
In this way, after thoroughly studying these technical drawings, Su Bei handed these technical drawings to Wang Ming below.
Let him select a group of workers and familiarize themselves with the relevant production steps in advance. At the same time, he will also learn the machine tools and materials needed for this 88mm anti-aircraft gun.
They were all sent to the chief, when the chief received the machine tools and equipment raw materials needed for the 88mm anti-aircraft gun.
He immediately activated his connections and mobilized people from various places. It has to be said that Su Bei has the support of such a chief behind him.
In terms of weapons manufacturing, it would be much easier. At least there would be no need for Su Bei to worry about things like these machine tools. If Su Bei could just let Su Bei figure it out on his own.
That would be troublesome. Su Bei has no foundation in the country. Unlike the chief, who has a huge network of relationships, if Su Bei is allowed to solve the machine tool problem.
Maybe up to now, the daily output of M1 Garand rifles has probably not exceeded 100. How can it be like now, when 850 M1 Garand rifles can be produced in a day.
It can only be said that, like the chief, vigorously supporting the work of Northern Jiangsu, it can be said that most of the troubles in Northern Jiangsu have been solved.
Now, he only needs to purchase the corresponding technical drawings from the system mall, and then ensure that the workers below can skillfully make the corresponding weapons.
As for the rest, it was the chief's business to consider. At this time, the various units of the Eighth Route Army followed the chief's order.
The troops below put down the work at hand and began to think of ways to obtain the raw materials needed by Northern Jiangsu.
............
