[People who have to work hard to code on Sunday can’t afford to be hurt~~~].
Golden Light Technique: A basic gold-based Taoist mental method that can increase the affinity with the gold element and enhance the power of gold-based weapons, equipment, and magic weapons.
It is simply tailor-made for forging armor, but at the moment, Lin Tuo does not expect it to increase his affinity with Jin Xing. In fact, he has not even learned the Golden Light Technique...
He also hoped that the legendary internal strength could eliminate the fatigue in his arms and enhance his hammer-swinging endurance.
But, no...
Holding the ancient mirror, every time I use such thoughts, I face the same reminder: You don’t have true energy yet!
Experience points are not infuriating energy and cannot be used.
Although there was no immediate solution, Lin Tuo found a stupid solution during the process.
He found that when he watched the meridians of the sitting statue of Golden Light Jue, it seemed that the speed of the true energy flowing in the meridians suddenly became faster. At the same time, the corresponding parts of the body could be faintly felt. Only when the experience value was extracted could the Unique numbness.
Staring at the arm of the seated statue, looking hard and looking, after the unbearable numbness and itching, my whole body felt comfortable, and all kinds of aches, fatigue, pain... seemed to disappear quickly with this process.
Lin Tuo's spirit was greatly shaken. When the pain and fatigue disappeared, he jumped up and swung the forging hammer, and the sound of forging without any sense of rhythm and beauty was heard again.
Just like this, he hit the iron for a while, adjusted his breath for a while, adjusted his breath for a while, and hit the iron for a while... Lin Tuo quickly entered the state.
After getting used to the unevenness of the iron block, the rebound of the hammer, and the trembling of the arm, the sound of the hammer gradually became clearer and rhythmic.
With the increase of experience and the proficiency of his techniques, he saved a lot of physical strength. With the help of the bronze mirror's recovery, Lin Tuo was gradually able to complete the forging in one go. When the sword blank was returned to the furnace and heated up, he held the bronze mirror to recover.
Time passed unknowingly, forgetting lunch, forgetting hunger and thirst, forgetting tiredness. When the sun set, someone reminded him that it was time to finish work, and Lin Tuo had completed the fifteenth forging.
Don't think it's too little, don't forget, he didn't come here early in the morning to start forging directly. He was called by Liu Hong to negotiate in the middle of the morning and spent a lot of time exploring the function of the bronze mirror. If no one disturbs him, there should be no problem with twenty forgings.
This is far above Gu Xiaoyi.
And even though it was the first move, with the knowledge accumulated by time travellers, Lin Tuo was sure that each of the fifteen forgings was effective, and there were no major flaws. It was due to strength, experience, and perhaps some details were not handled perfectly. , but it is definitely better than Gu Xiaoyi. Compared with those old blacksmiths who have been immersed in this art for many years, it should be worthy of their eleven or twelve forging.
The old blacksmith's forging number is a standard. If it reaches thirty forgings, it will become a fine product. If it is only ten forgings, the success rate of cold spring quenching should be above 60%.
Gu Xiaoyi's talent is really not good enough. Even if he is forged fourteen or five times, it is not uniform and delicate enough, so he may not be as good as the old blacksmith who forged four or five times.
The wooden barrel theory is most applicable to mechanical forging. During the casting process, the short plate determines the accuracy of the entire workpiece. All must be perfect to meet the standard. If there is a lack of accuracy, the entire piece will suffer.
It's like a sword. If you strike it well elsewhere, 90% out of 100% is finished, but only 10% is weak. The density is uneven, which leads to twisting and cracking after quenching. 10% out of 100% is finished, and 90% is useless. It makes no difference, because no matter whether it is one slit or nine slits, the sword cannot be made, and the effort is in vain.
Gu Xiaoyi is always like this, willing to contribute and work hard. Unfortunately, there are always one or two flaws that are not found correctly every time, which leads to the failure of the whole thing.
When the sun goes down, the mines and smelters have to stop working. The sound of clanking will affect the high-level people's well-being and food, especially Paomazi.
However, just like you can go to the mines at night to mine far away, you can continue to do less dynamic work such as polishing the front.
Lin Tuo also wanted to know the data of his first work as soon as possible, forged it for the last time, inserted the sword blank into the furnace for warming before quenching, and at the same time called Gu Xiaoyi outside to add charcoal and fire.
Quenching is actually divided into three steps. The first is to raise the temperature and heat the sword blank to the austenitizing temperature for a period of time. The second is to rapidly cool to a specific temperature to allow the material to undergo martensitic transformation. The third is to temper and slightly raise the temperature to eliminate drastic changes in temperature. internal stress and increase toughness.
The whole process does not take long, one or two hours is enough, but it is the most critical part. It can be said that the effect of the final product is completely determined by this.
The forging plan is the prelude, preparation, fine-tuning the material structure, and trying to achieve the best.
Polishing is the finishing touch, when the overall situation has been decided. Although the best whetstone can add a bit of sharpness, it cannot change the inner fundamentals.
Quenching is the main text and climax, the most critical part of the entire process. Precise temperature control and precise time control are the biggest factors that modern metal craftsmanship relies on to surpass the ancients.
Lin Tuo held a bronze mirror and carefully measured the temperature in the furnace.
With the bronze mirror, he felt that he was a thoroughly modern person...
Through the bronze mirror, the furnace temperature can be directly measured, and even humidity, ultraviolet intensity, pollution index, wind force, magnetic field direction, date, etc. can all be displayed in real time.
This is also the reason why he believes that he can surpass those old masters and easily push the blacksmithing technique to a higher level.
While measuring and waiting, Lin Tuo took a look at his attributes and suddenly discovered that after a day of training, his poor strength and endurance attributes had unknowingly increased a little. No wonder he felt more relaxed as time went by.
At the same time, the experience value of Golden Light Jue in the skill bar has quietly accumulated to 60 points!
I didn’t feel that when I was meditating, but now I thought about it, and I was shocked!
You must know that in the past half month, the bronze mirror automatically operated, but it only cultivated 158 points. If so, practicing together in front of the mirror can speed up the accumulation. If so, the original Golden Light Jue cultivation speed is much faster than The remaining chapters, it is possible, are both. In short, after most of the day, it was sixty o'clock.
If you calculate it this way, if you don't eat or drink, and practice twenty-four hours a day, won't you be able to master the first level of the Golden Light Technique in two or three days?
Lin Tuo was itching at this idea, wishing he could immediately quench the fire and polish it so that he could go back to the house to practice.
I was thinking excitedly...and my eyes suddenly caught sight of a certain number, and I was stunned, Huh? Why is it that half a day has passed and the temperature in the furnace is still 823 degrees? Didn’t it get promoted at all?
"Xiao Yi! Xiao Yi!" I called out twice, and suddenly I heard something moving. Recall that when I was immersed in excitement, there seemed to be some quarreling and fighting sounds, and Lin Tuo pushed the door open and went out. .
Gu Xiaoyi fell in the courtyard, holding several long swords in his arms, blood gushing out...
