Chapter 418: Is it okay?

Style: Science Author: Sorceress's FriendWords: 2097Update Time: 24/01/18 13:05:02
The backbone of Jiuzhou's science and technology research and development department, under the cramming education, those without talent are kicked out to travel thousands of miles.

But Gu Qing still places hope on them. After all, in the whole of 2017, Daxia's integrated circuit imports reached 260.14 billion U.S. dollars, and the integrated circuit imports were nearly twice the crude oil imports. In the past 10 years, Daxia's integrated circuit imports have The total import volume of the circuit industry is as high as 1.8 trillion US dollars. When Jiuzhou Technology completely bundles Daxia Semiconductor from technology to equipment and personnel, how much benefit will it bring?

I don't even dare to think about it.

But now Vice President Zhou has thoughtfully summarized an industry report document.

"Under the current situation, the prosperity of the global semiconductor industry continues to rise. Except for Korea and Korea, the overall performance of the industry is eye-catching, and domestic semiconductor leaders are rising rapidly. Among the A-share listed companies in the 2020 annual performance report, more than 70% have achieved positive annual net profits. increase.

Among them, 10 companies including Xiaxin International, China Resources Micro, Zhuosheng Micro, and Seripu have doubled their annual net profits. Among the companies listed on the Science and Technology Innovation Board, the overall performance of the integrated circuit industry is also very eye-catching, with the total net profit of 26 integrated circuit companies increasing by 154%.

After industry surveys and our technical support researchers collecting information, we found that the shortage phenomenon in the semiconductor industry that started the year before last year has not been perfectly solved due to technological upgrades. We hold 10% of the shares in several large wafer manufacturing plants. , among which the production capacity of the 8-inch wafer fab is still full.

Data from the American Semiconductor Industry Association shows that in the first quarter of this year, global semiconductor sales increased by 13.2% year-on-year. Among them, our sales in Daxia ranked second, with a year-on-year increase of 6%.

However, according to our investigation, with the completion of the construction of Xiaxin Technology’s new factory, the Titan processor mentioned in Chapter 319 will also begin large-scale mass production, as well as the three stars of our Star Project The massive orders from companies such as chips, HiSilicon Kirin, and Loongson will further cause supply and demand contradictions such as tight production capacity and spreading price increases. Of course, these contradictions will also promote the performance growth of domestic semiconductor industry chain companies.

It is expected that by the beginning of 2022, twelve 12-inch wafer fabs newly built by Yanyan and other companies will be officially put into production. In terms of wafer foundry, Xiaxin International and Huahong Semiconductor continue to expand their production capacity. "

When Zhou Yi was thinking about the simple key points, his mood couldn't stop being excited.

This year, Jiuzhou Technology gave up the limelight to Suiren Company, but it has been practicing diligently behind the scenes. The wafer factory cannot be built out of thin air. Even the technical support from Jiuzhou Technology can only speed up the progress.

But when this year passes and chips begin to be officially supplied next year, what kind of world will that be?

He didn't dare to think wildly, so he could only endure the excitement, and even wanted to split himself in half so that the excitement would not disturb his work.

While Gu Qing was listening to the report, he was sighing in his heart: "It took me five years of work to roughly lay out the layout. There are so many industries and related knowledge involved in semiconductors..."

But he didn't know that in Zhou Yi's opinion, the big boss's slightly deep demeanor, coupled with his current straight handsome look, really made some men and women better than Mr. Yan.

After sighing for a moment, Boss Gu said: "When faced with industry trends or new technological changes, large companies often carry out mergers and acquisitions of corporate institutions to reduce R&D risks and expand market space. Even through 'sales equipment + binding' services' to improve customer stickiness.

The production capacity of our wafer fab is experiencing rapid expansion, other projects have begun to be put into production frequently in other places, and the relationship with the Chengdu City Bureau has also become delicate. You need to communicate with them more in this regard. After all, Daxia is a vast land with abundant resources. Each region has corresponding projects suitable for development. Projects such as robot manufacturing and wafer manufacturing are not too polluting, but some classified projects have precision and stability. The requirements are too high. The company has spent a lot of time and resources adjusting equipment and production lines after the earthquake in recent years. I hope they can understand it. "

Zhou Yi took a deep breath, this matter was indeed a bit troublesome.

Chengdu is located in a plain and is a key strategic rear area. Most of the high-tech companies available here are military-oriented. This is a legacy of history and a planned layout.

Although Xiaxin and Futukang are now setting up factories here, they are all in charge of production without much R&D capabilities. Now Jiuzhou Technology is a star enterprise created by relevant departments.

As a new vice president, he went to talk about relationships and industry with the big guys. He was really not sure whether these big guys would start to treat him coldly after chatting a few times...

In fact, his concerns are actually in the right direction.

The Chengdu City Bureau held several internal meetings last month, after the launch of Suiren Company's new products.

A direction was determined at the meeting, which is to draw a large circle into the Jiuzhou Science and Technology Community and its surrounding areas, and use Jiuzhou Science and Technology to drive the development of enterprises, institutions and universities in the surrounding areas, and ultimately achieve the comprehensive development of the southwest region. Places like Neon Aichi Prefecture, Stuttgart in Germany, and Cincinnati in the United States are on par.

And this is not a slogan, but relevant departments at all levels are thinking this way and are working hard in this direction.

After reaching an internal consensus, Zhou Yi attended the relevant meeting of the Municipal Bureau on September 3rd.

This time without Dong Qi accompanying him, it also marked that Zhou Yi had truly entered the core level of Jiuzhou Technology.

Before the meeting, he had a great chat with the big guys.

During the meeting, he was sweating like rain after listening to the boss's remarks.

What is the level of Neon Aichi Prefecture?

Although it has a population of about 7.5 million, it is Neon's famous precision machine tool production center. Here are Japan's famous little giants - Yamazaki Mazak, Okuma Machine Tools, Fuji, Toyota Machinery, etc. Among them, Mazak is the world's largest machine tool company with the strongest technical strength. It is a supplier to the US military's Joint Manufacturing Technology Center and the Boeing Group, while Okuma is Neon's largest gantry machining center manufacturer. Fuji not only produces CNC machine tools, but is also one of the world's largest manufacturers of SMT placement machines. SMT machines, also called electronic component placement robots, are essential equipment for electronic product processing.

What is the level of Stuttgart, Germany?

The city with the highest concentration of precision machine tool industry in Germany, five-axis machining center experts Hammer Company and EMAG are located near Stuttgart. Some companies in this area have lasers, laser cutting machines, bending machines, etc., especially in the field of 3D metal laser printing. , at the global leading level, some parts and equipment of the Dutch ASML lithography machine are produced here.

Of course, Jiuzhou Technology is not bad either. Now the territory of Jiuzhou Technology Community has almost become a small county.

The big guys think so freely. Is it true? Is it okay?