Although this man's tone was a bit wrong, Gu Qing still understood him very well.
When young people have been suppressed for a long time, they will be like a volcano accumulating pressure. If they accidentally lose control of their emotions, they will easily burst into anger. But now it happens that the other person's experiment failed, and he is feeling angry.
"Now is not the time to be negative. AS1-ML uses a 13.5nm light source and can achieve a 7nm process. In the future, it will also achieve smaller nanometer processes. However, your Pudong Microelectronics can only achieve a 90nm process at present, and there is a gap in lithography machines. Although it is not small, in general, the light source equipment in the lithography machine is the biggest hindrance technology. Just like the barrel effect in management, the shortest link is the most important to make up for.
The young R&D researcher was about to speak, but Professor Zhao interrupted him.
"Mr. Gu came to our Pudong Microelectronics laboratory for something?
Recently, our project has reached the most critical stage. This is the R&D building. For business matters, please go to the administration building with Manager Zhou to discuss. "
After Professor Zhao finished speaking, his meaning was clearly expressed.
Outsiders are not welcome here. You bosses and executives should not bother our R&D team to avoid problems with the project.
Although the R&D team beside him didn't say much, they couldn't hide the unwelcome look in their eyes.
People engaged in R&D don’t like to be criticized by outsiders, especially a young person who talks too much.
It's like a costume drama where the management added a young actor who has no acting skills and can only recite one, two, three, four of his lines, and then this young actor likes to give advice to the veteran actors in the drama.
That feeling, as disgusting as you want it to be, it's just disgusting. His mother opened the door for nausea - it's so disgusting.
Even the executive surnamed Zhou who came in with Gu Qing and his group was scolded by Professor Zhao.
However, Executive Zhou didn't have any intention of getting angry. He knew that Professor Zhao was like this, and he took matters into his own hands, and it was a taboo for him to bring people into the research laboratory privately.
However, remembering the purpose of Jiuzhou Technology's Gu, he still stood up and said: "Professor Zhao, Jiuzhou Technology's semiconductor department has developed a new light source. President Gu led the team here just to see if it can be used in our On the lithography machine.”
"New light source?"
"This young man?"
Only then did Zhao Xingxia notice that Li You and others behind Gu Qing basically each had a suitcase.
His eyes suddenly became a little hot.
"Have you brought a new light source?"
Gu Qing nodded and said with a smile: "Yes, for the safety of the equipment and the matching of the interfaces, we brought a total of five sets of new light source equipment."
"What light source do you use?" Professor Zhao asked, pushing up the frames of his glasses.
"The steady-state micro-bunched SS1MB light source developed by our Jiuzhou Technology Semiconductor Department can perfectly replace the DUV deep ultraviolet and EUV ultraviolet light it emits on AS-ML's high-end lithography machines."
As soon as Gu Qing finished speaking, the expressions of the R&D staff at the Pudong Microelectronics Laboratory changed.
Some even whispered to themselves: "Isn't this the research and development direction prepared by the professor at Shuimu University? The finished product is released before the theory is even perfected?"
"Yeah, a few days ago, some people in my Shuimu classmate group were saying whether this direction is reliable."
"Can this wafer manufacturing company have this R&D capability?"
"I don't know. Looking at their team, they are all new faces. I don't see any familiar faces in the circle."
Amid the commotion, Gu Qing and his party received everyone's attention.
But Li You and others held the suitcase handle harder.
None of them graduated from Shuimu Yanbei, and in order to support their families, they would rush to work after getting a master's degree at most, and had no time to join the social circles of academic circles.
However, Professor Zhao did not have too many strange eyes.
“For the new particle accelerator light source project, some people in China are conducting theoretical verification, but no experiments have been conducted yet.
We have communicated that based on this principle, we should be able to obtain high-power, high-repetition frequency, narrow-bandwidth coherent radiation, with wavelengths covering the terahertz to extreme ultraviolet bands.
It is expected to solve the core light source problem in independently developed lithography machines.
However, young people, this is not something you can just talk about. From theoretical verification to experiment, then to perfecting the theory, until finally creating a usable cost, it is impossible in five or ten years.
If your company wants to pursue listing, the existing business should be sufficient, and there is no need to carry out false project marketing promotions. "
Zhao Xingxia felt that this young man probably wanted to take advantage of the suppression of semiconductors and the rising public sentiment in Daxia to come up with a gimmick, and then the company would go public and make a lot of money.
This kind of thing happens every time when certain industries are in crisis, there are companies doing this.
As long as it is done properly, a leather company or a comprador company can even double its market value.
Although he likes to engage in research and development, he is also exposed to a lot of business matters.
But Gu Qing shook his head.
He looked at Li You and said, "Take out the adapted light source equipment for the S1A600/20 lithography machine with a resolution of 90nm."
Li You quickly put down the suitcase and opened it.
"Professor Zhao really misunderstood. Our company's technology research and development process is not a one or two year speculation gimmick.
We have already made light source interface adaptation and program adjustment for the two best models of lithography machines sold by your company.
It can be tested by your company or adapted to other models. "
Everyone looked around and saw that the large suitcase Li You opened contained a box that looked like an alloy suitcase.
Instead, Professor Zhao asked: "Does your company use discs or optical fibers?"
Most of the light source equipment currently on the market is based on fiber lasers.
In this regard, leading companies in the United States and England have monopolized this technology.
The German company TRUMPF, which provides lasers for lithography machine light source equipment to AS-ML, uses a unique disc laser.
Judging from the current market, both disc lasers and fiber lasers are top laser light sources, but as long as the power exceeds 200W, solid-state lasers from discs naturally have more advantages than optical fibers.
"Treading on the Stars"
Gu Qing sighed and said with some pain: "What we want to do is to be the best. Although the disc laser is expensive, it has a bright future. Of course we must work hard for it."
Disk lasers directly solve the bottleneck of traditional solid-state lasers in the thermal lens effect, and have high photoelectric conversion rates. They are expensive and good typical products.
Although fiber lasers have fewer faults at low power and are easy to maintain and cost-effective, their beam quality is low, even unstable, and they are easily damaged by highly reflective materials.
Li You and the others burned hundreds of millions, it was just good luck.
The technical direction is right, and Gu Qing is still there to guide the research and development throughout the process. Otherwise, would we have to rely on hundreds of millions and those modified equipment?
Even if one billion is given to those experts and professors, they can only do preliminary research and development...
