"There needs to be scaffolding inside, otherwise it will be too difficult to work! Make it a foldable one, like this!"
After getting on the platform, Ji Donglai wiped the sweat from his forehead and drew a simple folding platform on the platform, with a middle pin as a hinge.
Make the combination state at the end of the platform, otherwise the work below will be too strenuous.
"Use a 45-inch pin. Let it be done immediately on site. It will be delivered in the afternoon!"
Ji Donglai handed over the sketch to Gao Gaohe, who immediately drove back to the factory. The platform was completed in one afternoon, and Hehua worked overnight at night.
The thickness of 200 is beveled on both sides, and the defective spot is 100 in length. However, the length must be opened to 500 in length during repair, and there are slopes all around. This can ensure that the deformation of the entire joint surface will not cause cracking due to sudden changes.
"Mr. Ji, what kind of cutting do you use? An angle grinder?"
The internal platform was ready and it was getting dark. Ji Donglai followed him throughout the process.
The external three-pole natural gas spray gun has been completed. It is 12 meters high and the wind is howling. Ji Donglai specially made baffles on both sides of the defective repair surface to ensure that the flame can be sprayed vertically to the metal surface. The flame needs to be preliminarily prepared before starting welding. Heat for three hours.
No matter whether it is cutting or repairing in this internal sealed environment, fire must not be used unless seeking death. Once the oxygen leaks, even a spark can set people on fire. The internal grooves will eventually need to be polished and repaired by a corneal machine.
Of course, some people can take risks. It is a matter of probability that anything that happens when cutting with flames will happen. Ji Dong came to look at everyone around him and finally decided not to take risks.
"Don't worry, we use professional cutting equipment, but the crude method is too slow and inaccurate! You will know later when you come down with us to take a look!"
Throughout the repair process, Ji Donglai was worried that others would not cooperate well with Hehua, so he put on the goggles himself. Originally, Hehua was going to do it on his own, but Ji Dong came and was willing to do it. He was his precious special welder.
With Ji Donglai waving his hand, his men slowly lowered the hanging basket. Ji Donglai and Mr. Tian followed the passage to the vicinity of the bad spot.
"Weld this across here and adjust the angle..."
Ji Donglai took a steel ruler and searched for the joint point on the arc surface, then drew a line on the joint surface, and the tool holder holder was welded on both sides.
The reducer is equipped with a milling cutter, and Ji Donglai adjusts the cutter head to a 45-degree position.
"Mr. Ji, are you a magnetic drill?"
Looking at this strange organization under Ji Donglai, Mr. Tian's eyes were full of curiosity.
"The principle is similar, but there is a difference. What we install is a milling cutter, which also requires manual operation... Xiaolong, you control the cutting along this surface, remember not to cut too much at once, cut in a loop! Just cut the next surface. a lot of……"
Pointing to the 45-degree position, Ji Donglai started slot milling. The joint surface was burned and the hardness was much harder than the surrounding metal. Ji Donglai slowly controlled the tool head.
When it comes to the dead spot in the middle, the cutter head obviously shakes a few times and the feed speed speeds up.
On the way back, Ji Donglai reversed the direction and milled at 45 degrees. Gradually a smooth surface appeared in everyone's sight. Ji Donglai then handed it over to He Xiaolong.
"Didn't you realize that Mr. Ji is so capable of doing things by himself?"
Looking at Ji Donglai making samples, Mr. Tian's eyes were full of curiosity.
"Most of the technology in our factory was brought by Mr. Ji, and the process routes are basically made by Mr. Ji. We don't dare to hide our secrets when we follow the boss..."
He Xiaolong lit a cigarette, put on his gloves, turned around and said to Mr. Tian with a smile, Ji Donglai nodded his head.
"You talk a lot, hurry up, our special welder is waiting, don't you know?"
When Mr. Tian heard that many of the technologies in Ji Donglai's factory were developed by Ji Donglai, he was full of doubts and looked at Ji Donglai up and down unconsciously.
"No need to be surprised, I come from a family of workers! My father is an eighth-level electrician who works outside, and my grandfather is also an eighth-level worker! After being trained by two eighth-level workers, I am at least a seventh-level worker!"
"So don't worry about our professionalism. We are a team and no one is weak.
, you will know if we cooperate more in the future! "
One person is working on site, and two people are observing the surrounding environment. There is also a person supervising the fluid valve. As for the electrical appliances, Ji Donglai has also arranged for someone to do it, and there is no room for any oversights.
It took two hours to remove the defective surface. In fact, Ji Donglai could have cut it directly with an angle grinder. According to the techniques of several experienced workers under Hehua, he could fully meet the requirements.
Ji Donglai must let Mr. Tian see that it is not easy for Ji Donglai to make this money, otherwise the other party will not be willing to accept it. Hehua, who had rested in the middle of the night, then entered the bottom to check the progress. Mr. Tian said Bian was so sleepy that he couldn't even open his eyes.
"Mr. Tian, why don't you go back and rest first? Our repairs are not that fast. It will take a few days. Just come back while we are encapsulating them. Don't worry about leaving the project to us. You can also see It’s hard to earn this kind of money!”
Looking at Mr. Tian's nose with runny nose coming out, Ji Donglai pretended to be very concerned.
"Sorry, my physique is really not as good as yours. I will report to you tomorrow with the boss. It's not easy. It's hard work..."
After tightening his coat, Mr. Tian quickly asked the driver to drive him back to rest.
Ji Donglai waved his hand over there and greeted his friends with Hua. Not long after, the buzz of an angle grinder came from inside. Inside the sealed tank, the sound was particularly harsh. Even though several people wore earplugs, it was still jarring enough.
Mr. Tian arrived at the scene around 12 noon the next day, and Mr. Tian also came with Tan Xiumei.
"Hey, Mr. Tan is back? Give me a call and I'll pick you up at the airport!"
Looking at Tan Xiumei's big sunglasses, Ji Donglai came down from the ladder with a smile on his face. Tan Xiumei took off her glasses and looked around.
"Okay, I took on such a big project. Ji Donglai didn't realize that you are quite capable! Is this your new worker?"
Looking at so many new faces at the scene, Tan Xiumei looked around with a cold face. Ji Donglai knew what the other party was thinking. No wonder she started to take over the maintenance of the factory without passing by the other party.
"You have to stay alive, just in time to test the team! The orders you give me are getting more and more difficult, so I have to come and train them! Besides, there are more and more challenging orders now, so I have to build up the team first!"
"They couldn't send out this order, so they asked me to do it. I don't like to take it! If it wasn't for your sake, I wouldn't even spend so much money just to repair the reactor. Look at the pipeline over there. What? Acid-resistant pipes are good for money, but hard to get!"
"That line..." qs
Facing the guide, Ji Donglai began to exaggerate the difficulty of the project, and Tan Xiumei's face improved.
