At this time, the processing center has all been vacated, and Lao Zhao is leading his apprentices to load materials.
The work clothes have been welded during Ji Donglai's programming process, and four or five students around him are taking notes in small notebooks.
"Old Zhao, you enter the program and then start working on it. I'll squint. If you have any questions, call me!"
As the first product, Ji Donglai also attached great importance to it and had to follow him throughout the process. He simply slept upstairs with his clothes on. Although the winter in Hebei is a little warmer than that in the Northeast, it is not a joke. Ji Donglai walked towards the stove He threw some pieces of wood into his pocket, leaned back in his chair and fell asleep.
When I woke up again the next morning, Ding Aixing brought the buns.
"How's the processing going? Is it going well?"
After getting up, Ji Donglai wiped his eyes and went straight downstairs.
"It's necessary, Master Zhao has been following me! Boss, I will learn programming from you when I have time. This thing is still awesome, especially the machining center, which is much easier than working with these boiler parts!"
Ding Aixing and Ji Donglai were eating steamed buns while walking, looking at Ji Donglai with eager eyes.
When I tried to run the program last night, Lao Zhao discovered that Ji Donglai's program was very reasonable. In the early stage, he was just running the base level, and Ji Donglai had already segmented the program.
Lao Zhao was worried that the students would not understand, so he simply saved all the single-segment programs as separate programs, and changed the program every time he changed a processing surface.
Lao Zhao didn't sleep a wink that night, and all the processing so far went very smoothly.
"Okay, you can learn the basics from Lao Zhao first, and then come to me. It happens to be a holiday soon. I will teach you! If we have the equipment, we will try our best to get started. Remember, if there are conditions, you must do it. If there are no conditions, you must do it. Who can create conditions for you when you are here?"
After swallowing the bun in one gulp, Ji Donglai looked at the processed parts inside through the glass. At this time, the surface had been changed, the gap was being processed, and the surface had to be changed for semi-circular arc processing.
The entire product took two days to process. Ji Donglai's quotation to the elevator factory was 12,000, and Zhu Cunxin didn't counter-offer. After all, the actual processing price was this, and the middle price would only be a little lower.
According to the agreement reached between Ji Donglai and the elevator factory, Ji Donglai calculated the working hours directly and then calculated the price according to the requirements of the elevator factory.
"I didn't realize that Ji Donglai, you still have this ability. You can process such a large workpiece. You have capable people under you!"
For several days, Ji Donglai kept an eye on the factory. As the parts were directly requested by foreigners, Ji Donglai didn't dare to be careless in the slightest.
Tan Xiumei happened to drive to the factory. She didn't see Ji Donglai in the processing factory, so she came to the mold processing factory.
At the moment, Ji Donglai directly placed all processing under the name of the outsourcing factory at the elevator factory, which was considered an affiliation.
"There is a limit to the size of the machine tool, otherwise I would dare to make aircraft parts, but I still feel comfortable with good equipment!"
Crossing his arms, Ji Donglai looked at the busy people in front of him, with a long-lost confidence in his eyes.
"That's true. It's been a bit of a small job these past two days, but the technology content is very high. Some manufacturers here haven't understood it yet. Take a look!"
After following Ji Donglai for a walk around the mold factory, Tan Xiumei took out a drawing and gave it to Ji Donglai. Ji Donglai said hello to the workers and went out.
"Fins? These are also from thermal power plants. The heat sinks on them are a bit thick and dented. The price cannot be low! Is the quantity large?"
Looking at something very familiar, Ji Donglai's eyes lit up.
The so-called fin is a type of heat sink, usually used in large factories. The heat dissipation efficiency of this kind of heat sink is very high! Especially in thermal power plants, all the fin pipes are filled with hot steam.
Through the annular fins, all heat can be evenly distributed, which is used in many domestic factories. Only a few places in the Northeast still use cast iron radiators, which are impractical, heavy, and inconvenient to maintain.
"Are you really good at it? If you can give me a sample, I can take it and show it to the customer. They are asking for a lot of it right now!"
Hearing that Ji Donglai could do it, Tan Xiumei urged Ji Donglai to come early
Order to make samples, Ji Dong doesn't talk nonsense when he comes here.
He immediately took Tan Xiumei back to the riveting and welding workshop, drew a picture directly on the platform and asked He Xiaolong to weld a guide for himself. He also found two seamless pipes and measured the diameter.
The thick pipe can just fit outside the thin pipe, and then the guide and the thick iron pipe are welded together, and then the thin steel pipe is directly put on the lathe and turned at a slow speed.
"Swish..."
"Oh my God, this is how this thing works. Is it so simple?"
Tan Xiumei's eyes widened as she watched Ji Donglai gradually move the guide toward the back and spiral blades constantly appearing on the seamless pipe.
When it reached a length of one meter, Ji Donglai handed the guide to He Xiaolong. He used the carbon dioxide shielded welder to point a few points at the root of the blade, and then took the fin off the machine tool.
"Take it away, boss. The craftsmanship is not allowed to be passed on to others. This is the core craftsmanship of our factory. We rely on this to make a living!"
Ji Donglai blinked at Tan Xiumei, feeling mysterious for a while. Tan Xiumei rolled her eyes at Ji Donglai for the first time, secretly thinking that it was true that technical things were not difficult, but not difficult.
"Buzz..."
Ji Donglai was arguing with Tan Xiumei over there when his cell phone rang. Ji Dong glanced at Anjinda's phone and hung up, then turned around and took Tan Xiumei to eat KFC.
It was not until around four o'clock in the afternoon that Ji Donglai saw off Tan Xiumei and then returned to the mold factory. At this time, Anjinda was sitting in the office with a depressed look.
"Dong Lai, what's going on? Why did you leave my equipment outside?"
Looking at Ji Donglai coming back, Anjinda immediately stopped working. Ji Donglai made a gesture, took a sip of water and then sat down.
"There is no place. Didn't I originally want to make particle board? If you sell the equipment, I can't start the work! We have not negotiated with the elevator factory. Now I am outsourcing for them. I figured it out. I'd better make some money. Forget about the limited hard-earned money!"
"The dream of being a boss is a bit unrealistic for me. After all, my background determines my future! This mold factory is not mine. The equipment you see are all foreigners. Originally, I thought you could make particle boards, so I would provide you with supplies. Order some goods! I'll forget about it if you sell your equipment. It just so happens that the wood here can be used as firewood for heating!"
Facing Anjinda, Ji Donglai didn't show much except disappointment in his heart.
As a former classmate, Anjinda would not have been able to enter the capital without Ji Donglai. He originally expected the two men to support each other, but now Ji Donglai found that he had thought too much.
It had only been a few days, but the other party was already busy trying to distance himself from her.
It was agreed that the particle board equipment would be a stake in his company, but the other party had already sold it secretly, and he had no control over how much Anjinda invested in it.
