Ji Donglai was writing a report in the library. Looking at Ding Aixing's phone, Ji Donglai felt strange. Lao Zhao was following the things at the factory, so Ji Donglai was not too worried.
"Master, it's a big job. You'd better come back and take a look. Master Zhao's hair is almost pulled out! Master Zhao can't understand the drawings from the elevator factory. We are not as good at drawing as you..."
Ding Aixing on the other end of the phone looked at Master Zhao next to him, then looked at the pile of drawings on the table, and his face didn't look good. The English drawings alone are a big headache for these people, as the symbols and technical requirements are too difficult.
Besides, Ding Aixing has never seen the material of this product, so he actually cut it without permission. Ding Aixing is really worried that the equipment will be damaged.
Ji Donglai hurriedly finished the last few data on the report, and said hello to the teacher to return to the factory. It was going to be a holiday soon, and all the students started buying tickets.
"Damn, what a big job!"
As soon as Ji Donglai entered the factory, he saw several large castings on the ground. Strictly speaking, these should be precision castings, but they were definitely enough. .
It is more than three meters long, half a meter wide, has six claws in the middle, is thirty or more thick, and has an overall arc shape.
There is a huge bulge in the middle, and there is a lot of oxide scale on the surface of the product.
There are six products of the same type and more than a dozen small castings, all packed in wooden boxes.
"Let me go, 345! This is the base. It's all the work of the machining center. Let's go see when the work of our machining center is scheduled. First, take out the syringe mold, right away!"
Looking at the densely packed standard drawings and the technical requirements, Ji Donglai wiped his face. Old Zhao over there was relieved, and Ding Aixing also hurried downstairs.
"Can we handle this job?"
The rest of the people ran out, and Cui Mingyan walked out of the office with a coffee cup in hand. She looked at Ji Donglai frowning at the drawings and came over.
"Processing is no problem. The main thing is to study how to separate certain processes to the milling machine. I would be of great use to the machining center! It would be great if there was a large vertical lathe, or a large boring machine. These tasks It’s a waste to go to the machining center!”
Looking at the important markings on the drawings, Ji Donglai felt regretful that he still had few equipment here and the overall scale was still a bit small.
"What does a vertical car look like? Do you have any photos?"
Cui Mingyan's beautiful eyes moved when she heard Ji Donglai talking about setting up the car. Ji Donglai described it again, but the other party still didn't understand. There was no network in the factory, so Ji Donglai had no choice but to give up.
"Mr. Li, I'm sorry to bother you so late at night!"
After reading all the drawings, Ji Donglai took another look at the products downstairs and simply tried to call Li Dequn. Unexpectedly, Li Dequn was still in the company.
"It's okay. The company is still busy now. The tasks assigned by the general manager must be sorted out. It turns out that there is a bit of a mess here! What do you want from me?"
Knowing the relationship between Ji Donglai and Zhu Cunxin, Li Dequn has a very good attitude now.
"That's right. Isn't this the machining part drawings we just received from our company? If we have any rough drawings over there, please give me one. I will configure it according to the rough drawings!"
"I took a look at our rough product. The shape is very different from the final product. If you cut it too hastily, it will damage the machine!"
According to Ji Donglai's experience, all foreigners' drawings involving castings have rough drawings. With the rough drawings, Ji Donglai can directly input the product dimensions, and then the programming will be much simpler.
"Didn't I bring you there? What are these people doing? Damn it! Wait a minute!"
When Li Dequn heard that Ji Donglai asked for rough drawings, he frowned and patted the partition. His subordinates hurriedly found the drawings and distributed them for records. Li Dequn's eyes narrowed.
"I'll send it directly to your email later. You can print it yourself. I'll give you the official drawings here next time you come over to send samples. Sorry, brother, we made another mistake!"
Li Dequn felt itchy with hatred when he saw that only the finished drawings were issued in the drawing distribution record.
According to management regulations, give the factory
When direct-affiliated enterprises issue drawings, especially for products processed with strip materials, they must bring the blank drawings with them. Otherwise, wouldn’t it be nonsense for the processing unit to process them in the dark? Not only is the processing accuracy slow, but it is also prone to unpredictable problems.
"It will be very incense if you send it to me. Thank you, Boss Li. I will go to Tianjin to treat you to dinner when you have time!"
After putting down the phone, Ji Donglai immediately felt relieved and immediately started to build the finished product model. Once the rough drawings arrived, Ji Donglai used the finished drawings to provide data, and the product processing route was figured out.
"Who sent the drawings?"
Li Dequn sent the electronic version of the drawings to Ji Donglai, then turned his eyes to the office, scanning the faces of his subordinates.
"Zhang Xiwei, Viagra!"
Several of his subordinates said that the expression on Zhang Xiwei's face was very unnatural, and Li Dequn also slapped the table, wanting to find something to throw out.
The other person is a very nice young man on the surface, with good height and decent looks, but he has diarrhea when doing things.
Zhang Xiwei recognized a master in his work unit, and the old man entrusted Zhang Xiwei to Li Dequn before retiring.
Li Dequn took care of him again and again, but he really couldn't help him up! You ask him to read all the rules and regulations, but he won't read them, and he will do whatever he wants.
"When I come back tomorrow, let him leave the workshop until he leaves on his own. What the hell? The general manager is currently rectifying various departments and even gave me eye drops!"
Clenching his fist, Li Dequn slammed his fist on the table, causing the water glass to fly half a meter high.
Twenty minutes later, Ji Donglai came here and printed out all the drawings, followed by a long modeling process.
"Ai Xing, you build the rough model and give it to me, mark it according to the drawing numbers on the top. Master Zhao will mark the lower ones according to the size of the rough. Wait for the programming here to finish and get to bed immediately!"
After briefly looking at the drawings, Ji Donglai broke down the work again, and everyone began to work in batches.
In two hours, the complete model of the machined part was built, and the rough model of Ding Aixing was also just built. Ji Donglai carefully checked the dimensions, modified several places, and then started programming.
The biggest difference between UG and other 3D software is that it has a complete tool library. As long as you set the path for programming, you will definitely have no problem selecting the right tool.
Continuously selecting coordinate points, Ji Donglai has been busy for more than an hour, and finally got the program out and then tried it out.
The tool retraction distance was readjusted several times by Ji Donglai, and the final program was finalized. Ji Donglai then went directly to the mold workshop.
