"The success of manufacturing the metal eagle represents the decline of the island country and the German-Italian precision machining industry!"
This is the news headline on the Naanhu portal.
Taking advantage of the timeliness of Internet media, the four major domestic Internet portals took the lead in reporting the scene that took place in the corridor of the processing workshop.
The disbelieving expressions of several professors were photographed and became important images in various news articles.
In this regard, domestic Internet users were naturally delighted when they saw the news. They felt as if they had been stabbed to the point of frost. They could not help but raise their heads slightly, showing expressions of excitement and excitement.
Many of them couldn't help but shout, "Okay, Sugon Technology is doing a good job."!
Well, although it is Sugon R&D Center that is responsible for the development of the Sugon five-axis machining center, it is Sugon Electronics that actually owns the Sugon five-axis machining center and produces the metal eagle.
But people still subconsciously classify companies on the same level as Sugon Technology, including Sugon Electronics and Sugon R&D Center, under Sugon Technology.
There is no way, who told them that one of them is responsible for research and development, and the other is responsible for production, and both of them have little contact with everyone.
Of course, this actually happens not only domestically, but also abroad.
There are still many people who don’t know that Sugon R&D Center and Sugon Electronics are actually on the same level as Sugon Technology. Many people still subconsciously classify all achievements under the name Sugon Technology.
However, these are just side details. Whether people at home or abroad know about it does not affect the outcome.
While domestic Internet media, print newspapers, and TV stations are all reporting the Metal Eagle incident with pride, relevant news is also being reported overseas.
"Be alert! The island nation's precision machining industry is about to face a fatal impact!"
This is the headline of the iDaily newspaper in Tokyo, an island nation.
Previously, they reported the news about Sugon five-axis machining center fraud in a bearish tone.
Now they have to admit the cruelty of the truth, and the slap in the face really makes a "slap" sound.
"my country's precision processing industry may face huge challenges!"
This is the headline of the German-Italian newspaper in the island nation.
“What does it mean for Daxia to have a five-axis machining center with T5 tolerance level?”
This is the headline from the Washington Daily News in the United States.
"A US congressman said that he may consider canceling the import of high-end machine tools to Daxia."
This is the headline of the American Environmental Daily.
Of course, the high-end machine tools can actually be imported into Daxia now, so there is no need to wait for the documents to be revoked.
Because after learning that the Sugon R&D Center had indeed developed the Sugon five-axis machining center.
Moreover, the Shuguang five-axis machining center was used to process and produce a magical metal eagle in front of several professors and hundreds of reporters.
The United States just let it go, but it will take some time to go through the procedures to get the specific paper documents.
But it's obvious that based on the current situation, even if they let it go, not many people would really want to buy it.
Because various companies have set their sights on Sugon five-axis machining centers. After all, there are better ones, so why buy worse overseas products.
However, it is obvious that domestic companies do not know the fact that Lin Chen is not planning to sell Shuguang five-axis machining center in the past few years, so they are destined to be disappointed.
And even if the overseas side knew that Lin Chen was not planning to sell the Sugon five-axis machining center, they would not rearrange the interception network.
Because Lin Chen might sell Shuguang five-axis machining center at any time!
In this case, they might as well just sell their mid-to-high-end machine tools or five-axis machining centers.
In this case, they can still make a small profit. If Shuguang Technology really enters the market to grab business, they will not be able to sell it even if they want to.
Therefore, Sugon R&D Center's successful development of a five-axis machining center has broken the restrictions on the import of mid-to-high-end machine tools in the Wasenna Agreement.
Directly turning these many project regulations and documents that restrict the import of mid-to-high-end machine tools into pieces of waste paper!
It has to be said that Lin Chen has torn down another layer of barriers in addition to the 90-nanometer process semiconductor equipment, turning the two major categories of the Wasen Sodium Agreement into a pile of waste paper!
Presumably, the senior leaders of some countries are almost furious at this time. Of course, along with this, the attention of the entire Dawn system will be even higher!
And this is not a good thing for the entire Dawn system.
After all, making a fortune silently is the most suitable for the entire Shuguang system. This kind of result of being focused on is not what Lin Chen likes.
However, Lin Chen had already expected this scene, and Lin Chen was mentally prepared for something more serious to happen in the future.
After all, he wants to realize Daxia's dream of becoming a technologically powerful country, which in itself will have a severe conflict with the interests of a certain country!
…
Time continues to pass.
Although the Metal Eagle incident caused a sensation all over the world, causing heated discussions around the matter and marveling at Sugon Technology's miracles, time will eventually erase everything.
In the blink of an eye, a little more than a week passed, and the time came to June 20, 2005.
On this day, Intel officially announced their Core processor release plan.
They announced that they would release the first-generation Core processor on September 19, 2005, a very classic date for Intel.
Computer enthusiasts around the world are naturally very excited about this. They can't wait to see that Core processor and want to know how powerful this Core processor is.
Of course, in addition to the movement in the computer industry, there was also movement in the mobile phone industry two days later on June 22.
As for what this news is, this news is that Nominea, the former global mobile phone leader, officially announced that it will release their Nominea smartphone on August 12!
At the same time, the other three mobile phone giants are not willing to lag behind.
After Nokia took the lead, they also announced that they would release new smartphones. The official release time of mobile phones is mainly concentrated around August to September.
In response, some overseas people around the world who were very unhappy that Daxia Mobile became the leader in the global mobile phone industry and people who wanted to buy a smartphone suddenly became excited.
They can't wait to know how powerful the smartphones of the four major mobile phone giants are. They want to know how their smartphones are different from the Sugon S2 smartphone, and they want to know which one is stronger and which one is weaker.
After all, if Sugon Semiconductor had not mastered the 90nm process technology, they would definitely have said without hesitation that the four mobile phone giants would be stronger in terms of mobile phone performance.
But since Sugon Semiconductor successfully produced the first Sugon mobile phone chip this month, they are still not sure which one is stronger and which one is weaker. (End of chapter)
