Hearing this, Ni Guangnan's eyes also lit up, and then he smiled and laughed:
"If we really do this, I'm afraid some thoughtful people will be furious."
Seeing this, Lin Chen also showed a faint smile.
The thoughtful people behind this wanted to pry into the secrets of their Shuguang five-axis machining center, but after going round and round, they couldn't get it. They must be furious when the results come out.
After all, there has been such a large-scale publicity questioning the fraud of Sugon's five-axis machining center in Daxia and around the world. The costs and connections consumed in this process are definitely not low.
After spending a huge amount of money but getting nothing, even being fooled, how could they not be so angry?
So as Lin Chen and Ni Guangnan made their decision, the official website of Sugon R&D Center officially issued an announcement welcoming Professor Matsuda Daisuke and other professors to visit.
"Hahaha……"
Seeing Sugon Semiconductor's news announcement, a burst of triumphant laughter seemed to erupt in the general manager's office of the island nation's Sanleng Heavy Industries.
Obviously, this round of frenzy to question the fraud of Sugon's five-axis machining center is definitely related to them.
But how did they know that Lin Chen had already seen through the conspiracy and was ready to use his strength to treat them like monkeys?
Time passed slowly like this, and a few days passed in the blink of an eye. Domestic and foreign reporters also gathered outside the gate of the mechanical processing factory inside the Shuguang production base in Pengcheng.
That's right, Sugon Electronics is the real owner of Sugon's five-axis machining center, not Sugon Semiconductor or Sugon R&D Center.
After all, Sugon Semiconductor is mainly responsible for chip production, and Sugon R&D Center is mainly responsible for research and development tasks.
In this case, the processing and production tasks of parts are naturally handed over to Sugon Electronics.
After all, the development direction of Sugon Electronics is towards a very large comprehensive production group, and it is just right to leave it to them for production.
At this time, there are two Sugon five-axis machining centers in the Shuguang production base in Pengcheng, and the other two are in the Shuguang production base in Tianjin. This means that Sugon Electronics owns a total of four Sugon five-axis machining centers.
Of course, in addition to this, there are four Shuguang five-axis machining centers in the hands of the Daxia military, but where they are is not something Lin Chen should worry about.
In other words, there are currently only 8 Sugon five-axis machining centers in the world.
"Click, click, click, click, click..."
At this time, the sound of cameras flashing was heard in front of the gate of the mechanical processing factory inside the Shuguang production base in Pengcheng.
This mechanical processing plant is responsible for all metal parts processing tasks at the Pengcheng production base.
In the past, it was mainly responsible for processing some small metal parts for ultra-precision optical anti-shake lenses.
Now it has two Shuguang five-axis machining centers and officially has the processing and production capacity of "large parts".
So from now on, Sugon Electronics will have the production capacity for parts ranging from metal parts for optical anti-shake lenses to large parts such as engine crankshafts.
"Professor Daisuke Matsuda, what do you think of this inspection?"
An island country reporter at the scene asked Professor Matsuda Daisuke of Tokyo University.
In response, Professor Matsuda Daisuke raised his head slightly and said with a look of conviction:
"My opinion is still the same as before. Even if Sugon R&D Center dares to ask us to come over to verify the authenticity, I still insist that Sugon R&D Center is fake."
"Click, click, click, click..."
After hearing Daisuke Matsuda's words, the reporters also pressed their cameras one after another.
Then the reporters at the scene asked other professors, and the answers they received were the same.
They all claimed that the Sugon R&D Center was fake. Even if the Sugon R&D Center dared to invite them to visit and verify, they still insisted that the Sugon five-axis machining center was fake.
Unless Sugon Technology shows them the internal structure of Sugon's five-axis machining center and lets them operate it themselves...
However, while they are eloquent, what they don't know is that they are about to become the monkeys being played.
Time passed quickly, and with the participation of Daisuke Matsuda and several professors from other countries, the authenticity inspection meeting was officially held.
At this time, in the corridor outside the processing plant, Daisuke Matsuda couldn't help but look solemn as he looked at the huge machines in the room through the oversized glass window.
But the moment he turned around, Daisuke Matsuda's solemn expression switched to arrogance.
I saw him take out a document from his briefcase, then look at Chen Dong, the president of Sugon Electronics, and say with arrogance:
"In order to prevent you from cheating, this is a "parts" drawing jointly designed by several of our professors. I wonder if Sugon Technology dares to test it?"
"Why don't you dare?!"
Faced with Daisuke Matsuda's aggressive tactics, Chen Dong, president of Sugon Electronics, said that there will be something good to watch next.
So Chen Dong took the important drawing and handed it directly to the director of the nearby processing plant.
"Click, click, click, click, click..."
The sound of cameras flashing was heard at the scene, capturing the scene in front of them.
Many reporters holding notebooks quickly took down what Daisuke Matsuda and Chen Dong, the president of Sugon Electronics, said.
Of course, at the same time, they couldn't help but have curiosity in their eyes, not knowing what the final result would be.
I wonder if the Sugon five-axis machining center can process the "parts" jointly designed by Professors such as Daisuke Matsuda.
Of course, at the same time, they were also curious about what the "parts" were.
That "part" can be tested by Daisuke Matsuda, and its processing should be very difficult.
Unfortunately, the "parts" drawings have been taken away by the director of Shuguang Machinery Processing Factory, and reporters have no way of knowing what the "parts" look like.
So they could only look inside through the large glass windows in the corridor, and from time to time they would use cameras to take photos of the inside through the glass.
Because Shuguang Technology did not allow them to visit at close range and could only look inside through the super large glass in the corridor, they naturally could only take pictures from a distance.
What's more tragic is that most of the huge machine is made of iron, and only the middle part of one side has observation glass, so it's impossible to see clearly what the internal structure of the machine is.
Reporters could only barely see through the observation glass in the middle that a large piece of metal seemed to be being processed, but they could not see clearly because of the distance.
Professor Matsuda Daisuke was naturally very dissatisfied with this, so he spoke loudly in front of many reporters and asked:
"Mr. Chen Dong, I think there is a possibility of fraud on your part. I think we should be allowed to visit your five-axis machining center up close."
"Yes, we can only see clearly in the corridor. In this case, there is a possibility of the "parts" being subcontracted." (End of Chapter)
