Chu Jungui's original answer was mass production, but Kaitian's idea was also very interesting, especially for this primitive race that still worships the totem pole, pretending to be gods and ghosts may also have miraculous effects. It is very simple for Kaitian and Chu Jungui to create some light and shadow effects to disguise the miracle. Even though Kaitian is thin now, it is still no problem to create a ten-meter-high laser projection.
But after thinking about it carefully, Chu Jungui gave up this somewhat tempting idea. The reason is also very simple. The other party is not only a primitive religion, but also has a true god. The monster that appeared in the illusion was completely worthy of the standard of a true god of an indigenous tribe.
So Chu Junhui still implemented the original plan and started working according to Kaitian. He first picked up two high-strength alloy ingots, heated them with his bare hands and cut them into small pieces of different sizes, then threw them to Kaitian, and at the same time passed a complete set of design drawings.
The cut alloy blocks were placed vertically, and Kaitian turned into mist, covering them all in one breath. Then, in the mist, the alloy blocks began to slowly change shape, gradually transforming into a specific form. What Chu Jungui gave to Kaitian was a tool kit including various cutting tools and drill bits. If you want to mass-produce it, you must first have the tools.
This high-hardness alloy contains a large amount of titanium, which makes it very difficult to chew even if it is open to the sky. It takes half an hour to chew on a drill bit as thick as a pencil lead. Fortunately, Kaitian can process the entire set of tools at the same time. The fastest one takes only 3 minutes, and the slowest one takes 51 minutes.
While Kaitian was struggling with a complete set of tools, Chu Jungui began the second step of preparation before mass production: energy. Energy includes both machines and energy for living things to maintain their activities.
Chu Jun returned to the small highland, ran to a small tree as thick as a bowl, chopped it down with an axe, and then chopped down two nearby small trees, and carried them back to the camp together.
Originally, cutting wood was Kaitian's forte, but now that Kaitian was dealing with tools, Chu Jungui took matters into his own hands, using a hacksaw to cut the logs into half-meter-long pieces of firewood. Chu Jungui's strength far exceeded that of ordinary humans. The speed of the hacksaw was comparable to that of a chainsaw. It only took one minute to process three pieces of wood.
Chu Jungui filled some firewood into the thermal energy stove and started generating electricity. Then he lit up a bonfire, set up a bucket and pot filled with water, and began to boil water. While boiling water, Chu Jungui picked leaves. When he shot out, he could barely see the shadow of his hands. With a fighting skill of 24, he was able to pick leaves with ease. It only took 3 minutes to separate all the branches and leaves of the three trees.
He crushed the leaves casually and threw them into the cauldron. He then crushed the wild vegetables, dried fruits and animal meat found in the ape monster village, threw them into the cauldron, and boiled them over a high fire. The pot is 60 centimeters in diameter and one meter high. Once the food in this large pot is cooked, it will contain hundreds of thousands of calories.
While the meal was already being cooked, Chu Jungui went to chop down three more trees. This time he specially picked out a tree with excellent toughness. After returning to the camp, Chu Jun dropped his ax like flying, and a square piece of wood took shape in an instant. Then he picked up the hacksaw and cut the wood into four parts horizontally and vertically. Then Chu Jungui picked up a piece of wood, and the temperature in his hand rose rapidly. The wood softened under the high temperature of several hundred degrees, and was bent into a perfect semicircle by Chu Jungui. The rest of the wood was processed in the same way. Basically, Chu Jungui rolled his hands and bent them to form a semicircle. The four semicircles were put together, spokes were added, and a wooden shaft cut into a cylindrical shape was inserted in the middle, with a square plate placed on top, and a cart was born.
Chu Jungui looked at the time and saw that it only took 15 minutes. Facts have proved that if the manual speed is fast enough, it can achieve mass production results.
Chu Jungui picked up the cart and ran towards several large trees gathered together this time. These big trees are half a meter thick and more than ten meters high, and they are very lush.
Chu Jungui put down the cart and picked up the hacksaw. The sound of sawing wood suddenly sounded in the night, and the first tree fell down 30 seconds later. Then the next tree will also be 30 seconds, and the next tree will be 30 seconds again. By the time six trees were cut down, the hacksaw was already glowing dark red and was about to melt.
"The steel quality is not good enough..." Chu Jungui shook his head, picked up a tree and held it under his arm, picked up the ax, and cut away at the crown of the tree.
The light of the ax flashed under the night sky, and a piece of the tree flew out together with the branches and branches above, leaving behind a smooth and mirror-like cut surface.
After 4 axes, the front end of the log will become square. Then use another ax to pinch the tip, and a piece of wood will be ready.
Just like this, one, two, three, four, a piece of wood; two, two, three, four, another piece of wood. It only took 4 minutes to process all 6 logs. Chu Jungui threw all six logs onto the cart and pushed the cart back to the camp. These logs were heavy or light, and together they weighed 5 tons. Chu Jungui couldn't carry them back in one go, so he scored twice.
By the time he returned the wood, Kaitian had already processed most of the tools, leaving only the two most complex drill bits still being manufactured.
Chu Jungui cut out more than a dozen wooden poles of different thicknesses and attached handles to some of the tool bits. The thinnest one was only as thick as a hair.
The next step was the highlight. Chu Jungui took out a dozen different crystals and hundreds of metal blanks of different sizes, placed a metal plate on wood as a workbench, and started processing the parts.
He twisted a metal grain the size of a sesame seed, heated it to 900 degrees with his bare hands, then knocked it flat with a hammer, then picked up a drill bit as thin as a hair and drilled a hole in the middle, then picked up the sharpener and saw Chu Jungui's hand trembled imperceptibly, and he instantly cut out a neat tooth shape around the disc, then added a drop of water, smoke rose, and a gear with a diameter of 1.5 mm was completed. Chu Jungui visually inspected the processing accuracy to be roughly 0.002 mm, which is acceptable.
Chu Jungui put the gear aside and started processing the next part. When Kaitian finally finished processing the last tool, Chu Jungui also processed the last and 179th part. These parts include micromotors the size of rice grains, components with a diameter of only 0.4 mm, and two perfectly cut high-energy beam crystals.
Chu Jungui took a breath, held his breath, and moved his hands quickly and steadily to assemble the parts together. Then under Kaitian's gaze, a high-energy light speed generator including three material nozzles and two different frequencies was created. , the spray gun with the functions of feeding, shaping and curing appeared.
This is the core component of the basic manufacturing machine in the alien survival kit that is commonly equipped in interstellar travel.
With the spray gun, other parts would be much easier to handle. Chu Jungui had already prepared all the raw materials, and in just a few minutes, a fully handmade standard manufacturing machine appeared on the workbench.
In this way, in the first hour after choosing the camp, Chu Jungui built a cart, bought several tons of wood, cooked a pot of dark food, and harvested a set of hand tools that could process complex machine parts. Made a manufacturing machine.
Having the first manufacturing machine was like planting the first seed in the vast land. From then on, everything became possible. For example, now, the first thing Chu Jungui plans to do with it is to make another manufacturing machine.
(End of chapter)
