The magic hand, as you can tell from the name, can be released with any magic power.
However, if other magic powers are used, the magic power will collapse after being exposed to the excessive temperature of the hot iron liquid. This will not only increase the consumption of magic power, but in severe cases, it will also lead to the collapse of the magic structure, causing the magic backlash.
And if you use fire magic to release it, a moderate amount of high temperature will make the fire element more active, thereby reducing the loss of magic power.
But there are gains and losses. The activity of the fire element will also make the magic hand more difficult to control.
Staring closely at the iron juice that had melted into a molten form, Yaro carefully handed over the magic hand he had released.
"The Romance of Fairy Wood"
Got it!
Yaro was so happy that he didn't dare to relax at all, and immediately controlled the magic hand to grab it.
Now, Yaro wants to move it to the shaping table.
The shaping table is also a must-have tool for novice alchemists. Its function is to generate a repulsive force to suspend the material in the air.
The scorching heat wave caused fine beads of sweat to appear on Yaro's face. He stared closely at the dazzling eyelids that swayed slightly in the air, like holding a bowl full of soup. He held his breath and concentrated, walking softly, not daring to There is no slack at all.
The energy consumed in this process is no less than that of an extremely fierce battle.
Because every time the molten iron touches the edge of the magic hand, the fire magic power in that part will become more active. Yaro must reduce the magic power in that part, and when it continues to shake, it needs to be restored to normal. Degree.
The iron juice is constantly shaking, so Yaro needs to constantly mobilize the output of magic power. The whole process is like whack-a-mole, with highs and lows, and constant ups and downs.
It's also Yaro's reaction speed that's superhuman, otherwise ordinary people really wouldn't be able to do this!
"Finally moved over."
The complex magic patterns on the shaping table emit a faint light, and the dazzling iron juice floats quietly above, releasing its own heat wantonly.
Yaro breathed a long sigh of relief, checked the sweat on his forehead, and looked at the heating table only two meters away, feeling puzzled.
"Is it that difficult to just move so far? How does a normal apprentice do it?"
Yaro picked up the "Alchemy Introductory Manual" beside him and read it purposefully.
That’s right, Yarrow hasn’t finished the book yet.
Because learning is done in different ways, the depth of memory obtained is different.
Generally speaking, the normal order is: listening＜seeing＜speaking＜doing.
This is because different methods activate different sizes of areas in the brain.
It’s better to do it once than to say it a hundred times.
When you encounter a problem, read a book, and solve the problem, the effect is better than reading and reading books for a long time.
"When moving the high-temperature solution in the early stage, you need to concentrate the magic power at the bottom, and then move the magic hand quickly. When it finally stops, the normal magic power mobilization sequence of the magic hand is..."
Yarrow...
What a good idea. During the process of rapid movement, the solution is squeezed together with the help of acceleration. Once it reaches the shaping table, the solution can be suspended with the help of the power of the shaping table. After that, it only needs to offset the inertia.
Hmm...this is the disadvantage of starting recklessly without even reading the book.
Yaro took a deep breath, repeated it several times, used the magic hand again, and then flipped through the "Alchemy Introductory Manual" while doing preliminary shaping.
"It is difficult to shape metal when it is still at high temperature. If the magic hand is proficient enough, you can directly shape the object into the desired shape, and then use the 'Quick Condensation Technique' on it..."
What the book said made sense, but Yaro couldn't do it, so he chose the method taught later - wait for the iron juice to cool down.
"When the metal cools to a certain extent, its solid properties begin to appear, but it has not completely solidified, like soft soil, then it can be shaped."
The power that the zero-level magic hand can exert is only about five pounds. Compared with the cooling speed of the metal, the time it can be operated is very short.
"It's just that at normal temperature, this state lasts for a very short time. It's best to use the 'heat melt' technique to keep it warm..."
Got it, Yaro smiled confidently and closed the book.
…
Yaro looked at the twisted iron rod floating in mid-air speechlessly.
The first-level trick, Heat Melt, is much more difficult than the zero-level trick. Although Yaro is very familiar with the zero-level trick, he still failed too many times when he used the first-level trick for the first time.
Seeing that the iron juice had cooled down, he made such a strange object in a hurry.
Yes, Yaro already wanted what he wanted to do.
The purpose he had in mind was to attract Bosco's attention, so naturally he had to make something novel.
Just like an ordinary apprentice, if he only made a rubbish weapon for the first time, he would have lost a great opportunity for performance.
"It seems that we can only resmelt it, but before that, we need to practice the thermal melting technique."
Yarrow had the idea of making his own molds and injecting iron juice many times, but he was restrained every time.
He couldn't take shortcuts, and the production process at this time was already an exercise.
Making the mold itself also takes a lot of time, and wizards rarely do anything that requires a lot of mold making.
Because the acquisition of extraordinary materials is very random, many times the things obtained may only be enough to be made once.
Even if there are a large number of repeated extraordinary materials, it will be difficult for a single wizard to obtain them, which will naturally attract the attention of the powerful wizard alliance.
Therefore, most of the mold making modes are only applicable to the Wizards League.
A zero-level trick, a single use only uses a little magic power.
The magic power of a single use of the first-level magic is about three points. At the same time, the melting magic is also a continuous magic, and it will continue to consume one magic power every minute.
With Yaro's current amount of fire magic, it was only enough for him to perform a complete alchemy.
"Do you want to use your skill points to charge directly with the Melt Technique?"
Yaro was a little hesitant, the shortcut was right in front of him, but he was a little reluctant to let it go.
Just looking at the increase in experience points, we can see that it will become increasingly difficult to obtain experience points in the future, not to mention that Yaro doesn't know the highest level he can reach.
What if level 50 is the limit?
Or maybe the limit is level 100?
But after thinking about it, Yaro gritted his teeth and decided to use it!
Isn't the golden finger used to quickly increase strength when it is weak?
When he becomes stronger and in this extraordinary world, he might even be able to forge a golden finger with his own hands!
Not to mention, this is the first level one trick I have learned, which is much more difficult than the level zero trick. I really have to wait for myself to learn it slowly, and I don’t know how long it will take.
Use skill points to learn quickly first, and the time saved will be enough for you to learn countless other first-level tricks in the future.
Therefore, Yaro's current problem is how to design the thermal melting technique into a skill move.
The heat melt technique will produce a temperature of about 500 degrees, and the skills and moves must be released close to the body. What should be considered so as not to burn yourself, and it is best to have enough lethality.
