The kingdom's overseas capabilities are limited, and technology diffusion directly uses the form of investment promotion conferences. However, this investment promotion is for overseas recruitment, and the participants are mainly overseas businessmen.
Before the rise of the Phoenix Kingdom, the definition of a merchant was relatively narrow, generally selling things from one city to another.
Later, some overseas businessmen also organized a little bit of production work, but not much. Basically, they were copycat and rebranded products.
This time, we are looking for people with a little bit of production experience, and at least have managed a workshop... except flour milling workshops.
Because the time schedules of overseas businessmen vary greatly, in order to involve as many people as possible, the investment recruitment process was made a bit strange.
The first is an exchange meeting, where businessmen with basic qualifications are gathered together and allowed to communicate and consult on their own. Food and accommodation are free, and there are no other benefits.
About ten days later, preparations for the second project were completed and the exhibition area was opened. Here is a collection of various machines to be sold in this round of technology diffusion, as well as some product concept drawings.
The country has gradually become electrified, but it is obviously unrealistic to require overseas businessmen to first purchase power generation equipment and build their own power grids.
Most of the machines in the exhibition area are steam-driven. Unlike the earliest steam forging machines, they are already in the form of equipment with separate boilers and machines. This type of steam equipment is relatively mature and can be used to build a good car, but the pass rate according to standardized indicators will be lower.
In addition, there are equipment in surrounding areas that were affected by railways before floating islandization. This part is more inclined to single-cylinder diesel engine transmission. Its form is more compact, but subsequent use of oil may cause transportation problems.
The problem of refined oil output is restricted by air transportation and has not been solved. The glide type does not consume fuel, but the number of aircraft is still relatively limited, and there is no spare capacity to transport oil outwards.
The export of aircraft was previously allowed, but the time period was not long enough, and it was difficult to allocate overseas own transportation capacity to things like fuel.
The most important problem is that the oil production capacity of Quanquan City has not spread out.
The oil production equipment in Quanquan City is very rudimentary, but there are still thresholds. Materials and processing technology are not something that can be figured out just by looking at the appearance and patting the head.
This makes it difficult to find alternative suppliers like Quagmire City in distant areas. Either the oil quality is poor or the price is high.
In short, the exhibition area consists of these equipments.
The concept drawing is rather bizarre. It was drawn temporarily by the relevant manufacturer after receiving the task, and there is no finished product.
This part mainly includes things like guns, steel-making furnaces, and projectile production lines.
The kingdom had a lot of early guns and machine guns that had been replaced, but each weapon cost several hundred or thousands. Before the island was transformed into a floating island, the number of weapons that had been replaced was only twenty or thirty thousand. Many of these weapons have been authorized for use by security companies, and part of the inventory will be destroyed in batches year by year based on aging. There are not enough left for export, so new guns are needed.
The new gun is technically the same as the previous generation, but it is not deceptive and can still be used to deal with low-level and mid-level demons. It just lacks the cooperation of anti-magic weapons, so the effect will be worse.
Once you've technically reached level 3, it's easy to go back and make level 2 weapons, and you can set some targets that seemed impossible at first.
For example, the main gun promoted at the exhibition is called "Doso-1", with a caliber of 10 mm, a total gun length of 1050 mm, a foldable butt, and all parts can be disassembled.
None of our own military guns can be disassembled in all parts, because the magic circuit in magic firearms and the disassembly ideas are somewhat mutually exclusive. To improve the reliability and hit rate of firearms, they cannot be disassembled and assembled casually.
It’s not that we don’t need reliability for overseas sales, it’s just that the sales volume is expected to be quite large and it will inevitably require co-production with multiple factories. It’s not that easy to do it with the original idea, so we might as well take it apart.
The same is true for steel-making furnaces and projectile production lines. If all weapons components have to be produced in-house, the technical manpower will be severely squeezed, which may result in the relevant manufacturers being unable to take into account research and development and other businesses, and the pressure on air transportation will also be relatively high.
There is no power grid outside the country, so these off-the-shelf items have to be specially designed not to use electricity. It is good that the production line can be transported separately. The steel-making furnace only sells crucibles and makes the rest by ourselves.
As for whether the export of steel-making equipment will take away your own business, there is no need to worry. The output of steel is much less than that used domestically. It is mainly used to anchor the price of Phoenix coins overseas. After the floating island, the steel coils and steel bars are used. The class has almost stopped, and crude steel ingots, steel strands and small-sized steel plates are only exported to a few friendly areas with strong demand.
The main source of performance of steel is heat treatment, and reprocessing of crude steel ingots requires hot rolling or even re-melting. This results in huge performance differences in the same raw materials in the hands of different manufacturers, which is not conducive to the formation of steel indicators. But there is no way, some things just can't be transported by air. For example, a roll of steel weighs more than ten tons, and the vibration of air transport cannot be tolerated.
The exhibition area has been activated for a while, and what is expected to come has almost arrived, so we enter the third stage.
Like exhibitions in the information age, although the main process progresses to the third stage of the island, the exchange meeting and exhibition area are still open.
This part is a lecture.
The language barrier does not need to be ignored by the authorities. These cross-border businessmen have either learned the Qin language themselves, or are always equipped with language knowledge tools or magic. At worst, they have to bring a translator. After all, learning the Qin language is easy to make money, which is still very attractive.
The content of the teaching session is mainly about some basic knowledge of mechanized production, including safety, management and other aspects.
For the safety theory of machine production, you can refer to several core principles - never wear gloves on any rotating equipment, and wrap long hair; in any place with a strong smell or visual fog, it is best to use cloth or sandbags to protect your breathing; In high-temperature areas, large amounts of drinking water and fire-fighting water must be readily available.
In the nearly 20 years of machine production, it would be outrageous to say that there have been no safety incidents at all, but not that many. Mixed bloods are also better than mixed bloods. Ethnic groups with some intellectual deficiencies are more able to withstand repeated operations and are often much more powerful than pure humans. This combination can stop many accidents before they die.
Here, the second generation of disasters have made a greater contribution.
There are a large number of immobile factories in the wasteland, and the safety slogans will not disappear in just a few decades. They have seen these, and they may not know why at the time, but they came to the penal colony and worked hard in production or management of production. Will consciously pay attention to these dangerous situations. As long as a few key factories have safety manuals, they will gradually spread through people-to-people exchanges... Mainly, companies will be fined heavily if someone loses their life.
In addition to safety and management, the lecture also includes some basic models, such as how a blast furnace makes iron without electricity and oxygen filling, the basic principles of a single-cylinder engine, etc.
Technology diffusion Technology diffusion cannot be relied on to be produced and sold by one's own production. Not to mention the transportation capacity, many things cannot even be transported by air.
Most of the businessmen participating in the meeting will return empty-handed in the last session. With the gains in the third session, their trip will not be in vain.
The last session comes just a few days after the lecture.
This section is divided into product sales and business authorization auctions.
The product sales part is what happens at the second section of the exhibition, where businessmen directly negotiate with representatives of various companies.
The auctioned parts are relatively important industries.
For example, how to extract crude nickel from slag? The last step of nickel smelting requires electrolysis. There is no way overseas can do this. However, if overseas can directly complete the crude nickel extraction through sulfidation, oxidation, and reduction, at least it can effectively reduce the transportation pressure.
In addition, there are ammonia synthesis, several element penetration methods and heat treatment methods of crude steel, single-cylinder engines, etc.
Because the structure is simple enough, there are several places overseas where people are tinkering with single-cylinder engines. However, with a good horse and a good saddle, there is no complete set of theories and equipment, and what is created feels like it is a step behind the times. Judging from some prototypes purchased overseas, the average lying distance does not exceed five kilometers. The best among them is the hand-forged cylinder block of Fatel, which can run dozens of kilometers at the Pingshun test field.
But just like that, the technology provided by the automobile factory that has developed to the finishing stage cannot be used for thousands of hours. Given the lack of literate workers abroad, ensuring stable operation for at least hundreds of hours after leaving the factory should not be a big problem.
Attribute point philanthropist
