Chen Yi's first research project based on the honeycomb stereo lens group was laser weapons.
After cooperating with a certain laser weapons unit of the military, it didn't take long to develop related finished products, but various tests are still in progress.
The time when related products were released is too short. According to the rules of Pla, it must be tested in various environments to collect relevant data before seeing how it goes. After all, some problems cannot be seen in a short time. It must be Conduct comprehensive testing over a long period of time.
However, the first-line actual combat data used on the Specter group a few days ago was a treasure for the military. Based on the relevant data feedback, the project team began to make new improvements.
Chen Yi doesn't need to worry too much about laser weapons. He is now focusing on the light source system of the extreme ultraviolet lithography machine, although the term extreme ultraviolet lithography machine has not yet been born in this era. . .
However, after the successful development of the honeycomb stereo lens group, not only the development of the extreme ultraviolet light source system was reduced from purgatory difficulty to hard difficulty, but also the first half of the reflective projection system was reduced to normal difficulty.
The light source and reflection projection system in front of him began to operate after a while of Chen Yi's operation. Through the special filter glasses, Chen Yi saw a beam of red light with a power of 20 kilowatts entering the lower surface of the trapezoidal crystal.
A micro nozzle inserted into the hollow part of the lower bottom sprays out a series of high-speed moving liquid tin droplets with a diameter of only 20 microns. It looks like a continuous water line to the naked eye. In fact, there is a tiny gap between each drop of liquid. This frequency is the same as the frequency of laser irradiation, 50,000 times per second.
It must be ensured that each time the laser is focused, it hits the surface of the tin droplet, causing it to instantly vaporize and ionize to produce plasma, which radiates extreme ultraviolet light with a wavelength of only 13.5nm.
Extreme ultraviolet lasers cannot be generated and amplified in ordinary substances, but can only be generated in "special substances". This "special substances" are electrons in a free state that are separated from the nucleus and exist alone.
Therefore, it is necessary to go through so much trouble to first create a vacuum environment, and then design an ultra-high-precision laser irradiation and target injection system. At this time, a beam of extremely short-lived extreme ultraviolet light can be obtained.
But this is only the first step. Next, the extreme ultraviolet light emitted by the vaporization of the tin droplets spreads into the interior of the honeycomb stereo lens group. After a series of controls such as refraction and reflection through countless lenses, it is finally exposed. required light source.
Well, this is just the first step in the long journey of developing extreme ultraviolet lithography machines. If the next steps are described in down-to-earth terms, that is, in less professional terms, they are:
Extreme ultraviolet light is irradiated on the designed integrated circuit diagram, and then the circuit diagram is reduced to an astronomical multiple and then crammed onto a wafer with an area about the size of a fingernail.
But in a simple sentence, it requires more than a dozen systems, tens of thousands of high-precision components, and hundreds of actuators and sensors to integrate the entire equipment under the precise control of engineering and technical personnel, without any errors during the process. .
Chen Yi watched as a beam of purple light emitted from the upper and lower surface of the trapezoidal crystal and illuminated the special test plate. The entire machine began to operate continuously.
After observing the data feedback for a while, he found no problems and left the room. The collection of relevant data will be completed by Xuanyuan Goudan. Now that the light source has been produced, the problem to be solved is how to make the entire light source The system stabilizes for a long time.
There are a total of more than twenty dust-free workshops in this underground research institute doing the same thing. Since the cost of electricity is negligible, it will work wonders.
This is also one of the dividends of the development of yellow diamonds. Otherwise, why would those big guys from the mainland mess up Blue Star's gold futures market?
Those people on Wall Street may make money, but they will never lose money on the mainland.
. . .
Half a month passed quickly, and the time came to July 4, 1995.
In the past half month, a series of problems occurred in the deep ultraviolet light source system, such as unstable projection of the tin target, excessive vibration of the laser transmitter, and inaccurate focus of the honeycomb stereo lens group. The system could not operate within a short period of time. Okay, but once the entire system operates for more than a day, many problems will occur.
Although they are all minor problems, the error may only be about six decimal places plus or minus one, but this greatly affects the stable operation of the entire system. If used in actual production, any small error will invalidate a tape-out. Millions and tens of millions will be paid with water stamps, which is intolerable to everyone.
However, scientific research is like this. There is no need to rush. No matter which industry you are in, you have to find problems and solve them, and accumulate step by step until you are finally done.
Chen Yi's extreme ultraviolet lithography machine has just completed the first step of a long journey of thousands of miles, while Erica's business empire is in the first step.
Ever since she announced that she would throw away coins in Lampang and Qinglai mansions, the whole of Taibei was moved by her actions.
She first purchased a series of service packages from legion. Localization packages and enterprise-customized versions are necessary. Others include personnel recruitment, market research, factory site selection consultation and other services. Due to the initial shortage of manpower, all services are temporary. Leave it to legion to help her. Ling Ling Zongzong spent almost 200 million U.S. dollars on services for almost half a year.
After receiving such a big order, the Titanium branch went into full operation. Almost a quarter of its manpower was lost at this time. Erica's stall was really too big.
We will use the cotton textile industry and food processing industry in Lampang and Thanh Lai Province as entry points, and use the deep technical and technical reserves of King Group to continue to extend upstream and downstream of the industrial chain.
In addition to expanding the territory of these two industries, it has also gradually extended to other cross-cutting industries such as electronic products and auto parts manufacturing industries and existing local industries, such as automotive interiors, lubricants, additives, etc.
Chen Yi and the others came to the conclusion that Erica wanted to build herself into a chemical industry giant in the Titanium Kingdom, but this idea was very likely to be realized.
After all, she has both technology and funds. What she lacks now is production equipment and qualified employees. The government must also welcome this kind of rich man who brings his own dry food and contributes to the basic industry of the titanium country. Especially Prince Mahe felt a burst of tears. Eyes full.
Finally, a big boss no longer engages in real estate, but still engages in basic industries such as chemical industry!
Chen Yi, Doctor, and Shapqiu welcomed this. After all, they couldn't take care of all the industries in the triangle area, and they wished that more people could help them take on some of the business.
This girl finally did something humane!
Even Chen Yi and the others felt that this girl was planning to open an industrial park of her own and take over all the chemical industry shares in Titanium Bei?
But he didn't care. After all, the factory was finally built, and he wasn't afraid of Erica doing anything wrong. The meat would rot in the pot anyway. This was much more reliable than the so-called investment promotion.
Erica, Roy, and Gabriel not only invested money but also brought core technology with them, and they did not worry about what would happen if the core technology was leaked.
Chen Yi was sighing, it would be great if those who came to invest were like these three companies.
So within half a month, Erica’s newly established company Sar Group (the first three letters of Sari Khan’s English spelling), in addition to the factory being built, even the employees were waiting to go to work, but Erica also Regardless of the small amount of money, the salary was paid as usual. At the same time, several training grounds were rented from the vest company to start initial training for the employees.
Erica was astonished by the efficiency of the legion. Among other things, she just talked about the site selection for the factory. The pile of standards given to her by the other party were enough to be placed on the topographic map in the army staff department and she was asked to select a few plots of land first. Then I conducted an on-site inspection and found that the efficiency was high.
She even doubted what the legion was doing. He looked very unseemly.
7017k
