Press conference!
Xu Zhou was stunned for a moment, then smiled.
Liu Zhongmin is right to say that the more times like this, the more a shot of cardiotonic is needed.
The Dragon Kingdom has to deal with the countermeasures of the United States head-on this time and must deal with them head-on.
Your country, the United States, has blocked the chips of our country, Dragon Country, and also locked the equipment legally imported by our country, right?
good! Then Longguo responded directly and directly, we will build our own lithography machine!
"Dean, when do you plan to hold the press conference?"
"In these few days, you have to prepare well. After all, you are the chief engineer."
In fact, what Xu Zhou fears most is publicity, but now as the chief engineer, he is also the rallying point for everyone.
He must set an example. If the coach doesn't have the will to fight, how can his soldiers fight?
Xu Zhou nodded and then changed the topic.
"Dean, how long can our existing domestic chips last?"
Liu Zhongmin thought for a moment and said immediately.
"The low-nanometer ones take about a month, and the 28-nanometer ones have been in stock before, so it is estimated that they can handle it for about half a year."
Xu Zhou counted the time.
In one month's time, Longguo will face the fact that there will be no more low-nano chips available in the country.
Even if all domestic companies take money to negotiate orders with foreign companies, they will not sell them.
"Dean, after one month, only 28nm tops will be available in China. According to my estimate, it will take at least close to a month to build the entire lithography machine. After that, there will be necessary debugging, mass production, etc. "
"It will take at least more than two months to fully restore supply."
Liu Zhongmin took a breath after hearing this.
It took a month to assemble it?
Will it take another month to complete debugging and form industrial supply? !
He once thought that he was old and had auditory hallucinations.
"Xiao Xu, this is no joke. In two months... we haven't even solved the problem of precision machine tools!"
Hearing this, Xu Zhou slapped his forehead helplessly.
"Look at my memory. I still remember that I told you to leave the machine tool to me some time ago."
Liu Zhongmin's pupils shrank suddenly, and the corners of his mouth trembled.
"You won't tell me that the machine tool has been built, right?"
Xu Zhou smiled and snapped his fingers, then took out the key from the drawer.
"Would the dean be interested in calling a few professionals to go take a look with me?"
"Nonsense, I'm going to call someone right now, let's talk while we're walking!"
After speaking, Liu Zhongmin, who was always steady, hurriedly took out his cell phone.
"Hey! Mr. Zhao? Come here now... Studio No. 5, yes, yes, yes, yes, call a few other masters over here, I have an important discovery here!"
"Hurry up! Don't waste time, I guarantee you a surprise!"
…
After a while, Xu Zhou was followed by Liu Zhongmin and six masters of about the same age.
According to Liu Zhongmin, these are domestic senior fitter technicians who are currently cooperating with Longke Academy, and they claim to be able to rub aircraft carriers by hand.
Of course, this is a bit exaggerated, but in terms of experience in machine tool operation and application, this group of masters is definitely top-notch in the country.
"Old Liu, why did you call us here?"
"Yes, mysteriously, I still have something on my hands."
Liu Zhongmin hissed.
"Don't be anxious, just put your hands on it."
After speaking, he asked Xu Zhou:
"Xiao Xu, are you sure there's nothing wrong?"
When he asked this question, everyone's eyes were focused on Xu Zhou.
"Young man, what's the problem?"
"Lao Liu came to us and didn't say anything. It seems that the problem lies with this young man."
"Go, go, what a young man, Xiao Xu is the youngest academician of our Academy of Dragon Science who is about to break the record."
Liu Zhongmin scolded him a few words to protect his shortcomings, but everyone was an old acquaintance, so they didn't care.
Xu Zhou opened the key at this time and explained:
"It's nothing major. I just made a small machine tool during this period. I would like to ask all the masters to come over and check if there are any problems."
Of course, Xu Zhou was not really looking for someone to find fault.
If he had done it himself, there might actually be something wrong with it.
But all these parts are produced in the system.
The drawings also come with the system, and the parts and accessories are automatically shaped by the system.
He is just a porter of the system, responsible for assembling it, and the system will naturally not go wrong.
Xu Zhou pushed with both hands and then turned on the lighting in the workroom.
Suddenly, a beast with the original color of steel appeared in front of everyone!
Xu Zhou looked at his work and felt a little excited.
The machine tool is about 6 meters long, 3 meters high and 2 meters wide.
It directly occupies the central position of the entire workshop.
And the moment the lights were turned on, the six old masters behind Liu Zhongmin suddenly opened their eyes wide.
"Fuck!"
"Fuck!"
"Fuck"
…
There was such a tacit understanding that all seven of them, including Liu Zhongmin, uttered curse words at the same time!
His eyes were staring straight at the machine tool, and he didn't dare to come in for a long time!
"It looks a bit crude because it was just done and there was no spray paint..."
Before Xu Zhou finished speaking, he was pushed aside by several people, and seven people swarmed directly to the side of the machine tool.
"This robotic arm...the joints have so many directions, it feels so precise!"
"The operating platform is so simple. Could it be fully intelligent control? In addition to the large robotic arm, there are so many small robotic arms. Is this possible for multi-frequency operation on the same platform?"
"Not only that, but also printing and molding functions, simulated assembly functions, virtual benchmarking... this..."
"What is the accuracy of this..."
"It's engraved on the nameplate... 0.00001 mm!"
"Damn it! My eyes are blurred! Is this thing really so accurate?"
The six professional masters were almost drooling looking at the machine tools in front of them.
Touch here, rub there, looking more attentive than taking care of a child.
At this time Liu Zhongmin also came to his senses.
Looking at the behemoth in front of me, it has a sense of technology, is exquisitely made, simple yet elegant.
Unable to help but twitching his brows, he turned around and asked:
"Xiao Xu... do you have any misunderstandings about small machine tools?"
Xu Zhou smiled awkwardly. He didn't want to, but this model was already the smallest model in the drawings provided by the system.
It is also a model that he can quickly assemble in a short period of time.
"What we mean is that there might be a bigger one later, so it's called small..."
"There are bigger ones!"
Liu Zhongmin quickly pinched himself, fearing that he would lose his temper due to fright.
It's not that he has poor endurance, but that Xu Zhou's operation is really outrageous.
Recalling that some time ago, Xu Zhou went to Zhang An to apply for a large amount of metal.
Now it seems that I am tinkering with this machine tool!
It's just... with the size of this workshop, how could he do it in such a short time!
All we can say is that Xu Zhou is truly a monster!
Seeing that everyone calmed down for a while, Xu Zhou stepped forward and introduced:
"I currently name this machine tool the Heart of the Dragon, which heralds the latest standard of precision in industrial manufacturing in our Dragon Kingdom."
"At the same time, this kind of machine tool can be fully automated. As long as you input the drawings and dimensions on the controller and fill in the raw materials, it can quickly complete the production of parts or accessories by itself."
"In addition to traditional functions such as grinding and turning, there is also a function similar to 3D printing. However, the accuracy of this function will be slightly lower than other functions. After all, the flow in the air and machine vibration will have an impact..."
Listening to Xu Zhou's introduction, the six masters burst into tears with excitement.
