Several days have passed in a flash.
During this time, Xu Zhou has been studying other super technologies that have not been unlocked in his mind.
However, the progress of proficiency is not satisfactory.
"Hey, at this rate, I'll be almost forty years old when I unlock the next item, right?"
"Besides studying, is there no other way to increase proficiency?"
Xu Zhou thought with some pain.
It's not that he rejects the process of learning. On the contrary, since he can live another life, he cherishes his time more and can learn more knowledge.
It's just that the proficiency increases too slowly.
According to the current progress, I am afraid that I will only be able to unlock four or five super techniques if I live to be a hundred years old.
This is simply a waste of resources for the dozen or so super technologies that he has not unlocked in his mind!
"Xugong! Are you busy?"
A man in his thirties was outside the glass partition.
Xu Zhou took a look and saw that it was Zhang An, the youngest academician in the academy.
"All the materials you asked me to get for you last time have been approved. Now they are all placed in the workshop in the West District. This is your key."
Xu Zhou took the key thrown by the other party and thanked him quickly.
"Excuse me, Brother Zhang, otherwise I will have to be idle now."
Because Xu Zhou's admission process had not been completely completed, for the sake of convenience, he had to ask Zhang An to help him apply for some research materials.
At that time, Liu Zhongmin also said that if it didn't work, just use his account. He had a high level and had a lot of funds.
As long as Xu Zhou can use whatever he wants, the creation is over!
If Xu Zhou hadn't kept ensuring that Zhang An had applied for enough, Liu Zhongmin might have sent the account number overnight.
"Hey, you're welcome. I don't have a project at hand right now. I just want to help you if these materials are approved."
As he spoke, Zhang An paused in his steps.
"By the way, XCMG, that studio is yours to use. When you are admitted to hospital and assigned a new studio, just give me the key."
After saying that, Xu Zhou didn't wait to thank him, but he took three steps and two steps at a time, and hurriedly left here.
Xu Zhou opened his mouth and smiled silently.
As expected, we are all engaged in scientific research, but the whole place is a social desert...
Putting aside his worries, Xu Zhou didn't waste any time and immediately came to the studios in the West District. Then he found one of them and opened it according to the number on the key.
At first glance, Xu Zhou was once again startled by the atmosphere of the Dragon Academy.
It's said to be a workshop, but it's almost a small factory.
There are a lot of equipment and instruments placed in the thirty-by-thirty square space.
On the ground outside, there were a lot of metals.
Xu Zhou stepped forward and took a closer look.
Cast iron, steel, copper, cast steel, etc., as well as some small amounts of special metals.
These things are what Xu Zhou asked Zhang An to apply for, and there are quite a few of them!
Next he will complete the first step of the lithography machine here.
Ultra-precision machine tools!
It has the title of the mother of industry!
This is a piece of equipment that can never be avoided in modern industry.
The photolithography machine is an equipment with as many as 650,000 parts in accessories alone. Among them, high-precision parts require this kind of super-precision machine tool to complete the processing.
And super-precision machine tools happen to be one of the photolithography machine gift packages.
In the end, how to make the machine tool is not a problem at all.
Xu Zhou's original plan was to hand over all the drawings and craftsmanship techniques to Longke Academy, and then let professional masters build it.
Although it may take a little longer, it should still be possible to make.
Because the most powerful thing about Dragon Kingdom is its strong organization and scheduling capabilities.
But as Xu Zhou continued to explore the super brain technology system in the past two days, he actually discovered a new function.
That is the shaping function similar to 3D printing.
As long as you load the required drawings and provide sufficient materials in reality, you can perfectly shape the materials into the accessories you need.
At that time, he only needs to install it one by one according to the drawings of the machine tool.
As for why we don’t directly shape the lithography machine, I’m sorry, 650,000 parts is really terrible.
And with machine tools, the photolithography machine can become a complete production chain.
Xu Zhou went to check the materials one by one to make sure there were no shortages or omissions, and then started the shaping work.
The first time he used it, he didn't know whether it would achieve the effect he wanted.
Taking a deep breath, he loaded a slide drawing into the system in his mind, and placed one hand on the cast steel material.
After a while.
When he opened his eyes again, the large piece of cast steel placed in front of Xu Zhou directly became a sliding seat!
It was exactly the same as the drawing in his mind.
Even he was shocked for a moment.
"This... is truly a surreal system... this is really awesome!"
Xu Zhou sighed with emotion, and then after confirming that there was no difference in size, he simply stopped working and took the time to generate all the remaining large accessories.
An hour later, Xu Zhou looked at the neatly arranged large and small parts in front of him and slowly breathed a sigh of relief.
"The next step is assembly. Fortunately, the equipment here is relatively complete, and there are also cranes. Otherwise, I wouldn't be able to move these big toys alone."
I looked at the time and saw that it was getting late.
Xu Zhou thought for a while and locked the door first, preparing to go back to the dormitory to rest.
Scientific research cannot be achieved through hard work. Sometimes it is also important to combine work and rest.
At this moment, in the conference room of the Dragon Academy of Sciences.
Liu Zhongmin and a group of academicians are working overtime to study the assembly issues within the entire lithography machine.
"Old Zhou! Come and take a look!"
Zhou Guofu adjusted his glasses and immediately came to Liu Zhongmin's side.
"What's wrong, Lao Liu?"
"Hey... the research and development of lithography machines is far more difficult than we imagined. Now through analysis, our 1-nanometer lithography machine requires 650,000 large and small parts, of which only more than 100,000 can be supplied domestically. "
Zhou Guofu frowned tightly when he heard this number.
This means that the remaining more than 500,000 parts need to be imported!
And importing means being stuck!
"Hey, I didn't expect that the most difficult hurdle was broken, but now the difficulty lies with the parts supplier."
"Yes, American capital controls the lifeblood of many countries, and many suppliers are controlled by it. We may not be able to buy what we want."
Liu Zhongmin gritted his teeth, his eyes firm.
"No, what we want to do is make it purely domestic. Even one screw inside must be produced by ourselves. Only in this way can we truly break away from the U.S. blockade!"
"But with so many precision parts... even our most advanced machine tools in the country may not be up to standard."
Zhou Guofu also wanted to give him a few words of advice. After all, strictly speaking, even the Dutch company Asma is just an assembly company.
The entire photolithography machine technology was jointly developed by many countries, so the ownership of the technology was not something that the Netherlands could control.
The photolithography machine has hundreds of thousands of parts, using dozens of countries and thousands of supply channels.
Finally, everything is collected to Asmai Company, where they carry out production and technical assembly.
But now that the Dragon Kingdom wants to be completely independent and localized, this difficulty is equivalent to requiring the integration capabilities of dozens of countries!
"How about we discuss it with Xiao Xu? After all, he is the chief engineer of the lithography machine. Maybe he has any ideas?"
Liu Zhongmin thought for a while and felt that what Zhou Guofu said made sense.
He immediately patted Zhou Guofu on the shoulder.
"That's right. I'll go talk to Xiao Xu tomorrow morning."
