Lin Yun slept for three whole days and three nights. This time he stretched and slowly woke up.
"After a good sleep, I feel really good."
Lin Yun moved his body and said.
"Okay, now that you've rested, it's time to continue carving the formation patterns."
Then, Lin Yun took the stone sword and walked towards the star beast.
Suddenly, Lin Yun noticed something was wrong.
"When did this place open up?"
When Lin Yun walked to the belly of the star beast, he found a hole about six feet wide.
"Did I drive it because I was too tired and forgot about it?"
Because Lin Yun was the only one in the stone plate of the avenue, Lin Yun thought that he had made the mistake and forgot about it.
But Lin Yun didn't care. Since the door was open, let's go in and take a look before talking.
Then, Lin Yun followed the opening and slowly walked into the star beast.
In less than a quarter of an hour, Lin Yun hurriedly walked out.
"Lao Bai, Lao Bai, is this you?"
Lin Yun shouted to the surroundings.
Because when Lin Yun entered, he found that the bones of the star beast were already covered with dense formation patterns.
"Stop screaming, I did it. The formation patterns inside are too profound. You can't figure it out. Please give me a hand."
Bai Lao did not appear, but the voice came over.
"Thank you, Mr. Bai."
Lin Yun said to the surroundings.
Although Mr. Bai did not take action many times, he rescued Lin Yun every time. Mr. Bai always helped silently behind Lin Yun's back. Lin Yun also changed from his initial resentment towards Mr. Bai to respect for Mr. Bai.
Afterwards, Lin Yun calmed down. Now that the array patterns in the body of the star beast have been completed, the next step is to cast various parts and install them on the body of the star beast.
However, the size of the star beast is too huge, so all parts of the casting must be extremely huge. Lin Yun has already measured the claws of the star beast, which are three thousand feet long, so casting in this place is very difficult.
Fortunately, the puppet casting technique also marked a separate casting method, and Lin Yun also decided to use this method to start casting the claws of the star beast.
Then, the avenue stone plate started to get heated, and Lin Yun began to melt pieces of seaweed stone. Then, Lin Yun took out a huge hammer and hammered it, hammering out the impurities inside bit by bit.
Not long after, Lin Yun beat a piece of sea grain stone weighing hundreds of kilograms until it only weighed about fifty kilograms.
"The quality of this seaweed stone is good."
Lin Yun said while holding the already crafted ore.
Generally speaking, for a piece of ore that weighs 100 kilograms, it is quite good to have about ten kilograms left after removing the impurities, but this piece actually had more than fifty kilograms left.
"However, at such a deep seabed, most of the impurities should have been squeezed out."
Lin Yun thought for a while and said.
"This is just the outer ore, I don't know what the situation is inside."
Lin Yun continued.
After Lin Yun finished speaking, he continued to calcine the ore to remove impurities.
In five days, Lin Yun forged tens of thousands of kilograms of sea-patterned stones, stacking them neatly.
"Ten thousand pounds, I don't know if I can complete this claw."
Lin Yun looked at the giant claw of the star beast and said.
Afterwards, Lin Yun melted the created seaweed stone. An hour later, the seaweed stone turned into a solution. Then, under the control of Lin Yun's soul power, the seaweed stone solution slowly turned into a sharp knife. Claw look.
After seeing that it was the same size as one of the pointed claws of the star beast, Lin Yun withdrew the mixed spiritual fire, and the calcined sea grain stone that lost its flame began to slowly cool and harden.
Lin Yun took advantage of this opportunity, took out his rune pen and began to carve formation patterns on it.
A quarter of an hour later, the runes were carved.
Lin Yun immediately controlled the huge sharp claws and firmly placed them on one of the star beast's claws.
At the same time, the control runes are connected to the runes on the pointed claws of the star beast.
"Buzz~"
For an instant, a white light lit up on the pointed claw, and then disappeared.
Lin Yun breathed a sigh of relief and smiled slightly, knowing that he had completed this piece of work.
"continue."
The success of the first piece greatly increased Lin Yun's confidence and he began to forge the second piece.
One day later, the four pointed claws on the claws of the star beast were equipped with steel pointed claws made of seaweed stone.
The next step is to start forging the protection on the claws.
But this place is a bit difficult, because the sharp claws are on the outside, and it is easy to connect the pattern, but the bones on the claws are in the flesh, so you can only open the skin and connect the armor to the bones, so that the pattern of the armor is in line with the bones. Connecting them together will allow the star behemoth to move more flexibly.
Lin Yun was not in a hurry at this step, but first came to the claws of the star beast, and began to use the stone sword to dig out holes at each joint that went straight to the bones.
Afterwards, Lin Yun came down and started to forge the armor. This step was relatively easy, and soon, pieces of armor were forged.
But the next step was the most difficult. Lin Yun had to cover the claws of the star beast with armor. Then activate the pattern and connect it to the active pattern on the bones, that's it.
Lin Yun had prepared dozens of armors with long spikes on them. Then, Lin Yun put on the armor, went to each joint, and placed the spikes into the big holes he had dug, making them fit perfectly. into the joints.
Lin Yun relied on his soul power to control the fire at the top of the spikes to melt the spikes, and then controlled the solution to slowly blend into the joints and bones.
Later, Lin Yun used his soul power to control the solution to form arrays on the surface, which were connected with the arrays on the bones. Soon, the connection of the arrays was completed, and in an instant, the arrays on the armor also It began to glow brightly.
"Once connected, the rest is easy."
Lin Yun saw the formation pattern on the armor being activated and knew that it was connected to the bones below.
Later, Lin Yun put pieces of armor on the claws of the star beast, connected them with mechanical buckles, and connected the formation patterns. In this way, the entire armor became one piece.
Although it was easier to cover the armor, the claws of the star beast were too big. For three or four days, Lin Yun had been busy trying to penetrate the spiked armor directly into the bones. He also had to pay attention to whether the formation pattern was correct, etc., which made Lin Yun extremely tired.
After five full days, Lin Yun was able to cover all the armor on one claw, and the formation patterns were linked together.
