A submarine research base in the East.
Dr. Ma shook his head, his face full of sadness.
"Failed again."
"The propeller cannot achieve the processing accuracy at all, and the numerical deviation from ours is not small."
In the conference room, all the experts looked bad.
They have been working hard for so long, but the new generation of nuclear-powered submarines have been unable to complete manufacturing trials because they failed to achieve several indicators of silence.
The first is a heavy-duty shock-absorbing floating raft.
The second is the anechoic tile.
The third is the propeller.
These three affect the performance of a submarine.
The biggest advantage of submarines is that they cannot be detected by radar. Generally, submarines can only be located and locked through sonar.
Therefore, the silent technology of submarines has always been one of the core technical indicators of submarines.
To measure the strength or weakness of a submarine, it is not how many missiles or nuclear weapons it can launch, but its silent performance.
Other performances of the new generation of nuclear-powered submarines have reached the world's advanced level. However, in terms of these three most important indicators, they can only be said to be close to the world's most advanced level and cannot yet be achieved.
This is unacceptable to Dr. Ma.
Since it is a new generation, it must be the best in the world.
Otherwise this new generation means little.
"Mr. Ma, let's think of another solution."
An old man had helplessness on his face and said: "Several military industrial groups are already setting up project teams to see if they can conquer it by concentrating their efforts."
Dr. Ma shook his head and said, "It's still difficult."
"The industrial distance is so great that if we want to achieve this technical target, our country's industrial processing power is still weak."
The entire project has been underway for five years.
With so many outstanding talents gathered but no way to break through, how could he be willing to do so?
You must know that once this nuclear submarine is completed, its advancement will be no less than that of the Polar Bear's Typhoon class, and it will become one of the truly top nuclear submarines.
For Eastern nuclear power, it is a new level.
As if thinking of something, Dr. Ma said: "I remember there was a global metal processing exhibition in the next two days?"
"This represents the top manufacturers in our country."
"Send someone to investigate and see if there are any manufacturers that meet our needs and make contact with them."
The only thing I can think of at the moment is this method.
Contact foreign manufacturers and see if you can get their top machine tools at a certain price.
It will be difficult.
Due to technological blockade, this path is almost impossible.
Let them process it?
Less likely.
If they are allowed to process the most important weapon of the country, a lot of data will be discovered. They can get a lot of the data they want from the propeller, so there is no need to continue manufacturing this nuclear submarine.
The only thing that can go away is to pin its hopes on domestic manufacturers and hope that they can live up to their expectations.
…………
Return to the hotel from the exhibition center.
Jia Zhengchu found Zhou Qiang and said, "Boss, I remember that in the apocalyptic world, we can get a manufacturing line for ultra-fast metal engraving machines. If you get one back, the ultra-fast metal engraving machine will be regarded as our first product."
Ultra-fast metal engraving machines are definitely on the rise.
But it is not yet qualified for manufacturing.
Fire was of no use. Jia Zhengchu didn't dare to sign the booking contract today.
Zhou Qiang thought for a moment and realized that this matter was indeed promising.
Hasn’t the West always banned such top-notch equipment?
He set up a manufacturing line and was decades ahead of them, allowing them to experience the feeling of going crazy.
Setting up a manufacturing line is indeed simple for Zhou Qiang.
"Okay, wait until the exhibition is over."
"At the exhibition, you can sign the contract first, but the delivery time is uncertain."
"Similarly, ultra-fast metal engraving machines must learn from the West. We need to know the traces of each one and have them sign an embargo agreement. They must not be leaked out."
I wonder what kind of expression the West will have when they find out?
The emergence of ultra-fast metal engraving machines will make many of their equipment second- and third-rate?
In terms of processing, Dongfang will directly become the number one in the world.
Not everyone in China can buy this kind of top-notch equipment, and qualifications must also be reviewed to prevent the equipment from leaking out.
Hearing Zhou Qiang's promise, Jia Zhengchu felt relieved.
He is a master of machinery, so he naturally understands what ultra-fast metal engraving machines mean to the world.
Definitely redefining the standard for precision machining.
the next day.
When Zhou Qiang and Jia Zhengchu arrived, the place was already crowded.
A large number of media reporters rushed in first, followed by major processing companies, and finally the machinery enthusiasts.
Zhao Siya and Zhou Ning both studied CNC machine tool design, which is really rare for beauties of this level.
It was in this industry that they realized how powerful the ultra-fast metal engraving machine they saw was.
As soon as the exhibition opened, a large number of reporters flocked to Mammoth Heavy Industries' booth.
Not just them, but also major processing companies.
The famous Mammoth Heavy Industries, a giant with a market capitalization of trillions, reporters are most concerned about the news of Mammoth Heavy Industries. Any news represents traffic.
Just for development, Mammoth Heavy Industries has three floors inside and three floors outside.
In comparison, even for a top manufacturer like Raphael, the number of visitors was pitiful, with almost no reporters visiting.
This scene made their faces turn dark.
"These Eastern monkeys."
The murmurs continued.
Everyone is indignant.
"Tsk tsk, the girls from Mammoth Heavy Industries are so awesome."
"On point, super figure."
"Wow, you can show off such a perfect figure even in formal clothes. God knows how great this figure is?"
"Hahaha, we are so blessed with this wave of benefits."
Whether they are reporters or machining enthusiasts, they are all amazed.
There are more than a dozen girls busy here, which is definitely a beautiful scenery.
This alone attracted countless people.
The two ultra-fast metal engraving machines displayed on Mammoth Heavy Industries' booth did not occupy a large area, and gave people the impression that they were just looking at beautiful women.
It took a lot of effort for Jia Zhengchu, Zhou Qiang and the others to squeeze in.
Compared with other people who were looking at the girl, representatives and bosses of major processing companies were gathered around two ultra-fast metal engraving machines that were still covered with cloth. They were itching to see what they were like. The machine can carve such stunning curb stones.
A large number of reporters were shooting wildly.
"Why haven't you lifted the curtain yet?"
"That's right, today is the open day, why are you playing mysterious?"
"There won't be any more rituals, right?"
"Does the machine tool also play the same tricks as the car show?"
Many people became dissatisfied.
Jia Zhengchu heard it but didn't take it seriously.
He originally wanted Zhou Qiang to host, but Zhou Qiang didn't want to be in the limelight. Instead, he hid aside and took Zhou Ning and Zhao Siya as spectators.
"Everyone, now I will reveal to you the true face of our ultra-fast metal engraving machine."
Jia Zhengchu pressed his hand and said loudly.
Two girls who were resurrected by the dark witch stood in front of two ultra-fast metal engraving machines. They grabbed the covering cloth and pulled it with their hands.
Suddenly, two ultra-fast metal engraving machines appeared in front of everyone.
Countless people's eyes were all focused on these two engraving machines, their eyes widened, and then they blinked.
That's it?
The two ultra-fast metal engraving machines are not very big. Compared with those large machine tools and CNC equipment, they are larger than trucks. However, the size of these two ultra-fast metal engraving machines is as big as a tricycle. .
too small.
It looks like a small machine tool at first glance. What role can it play?
Many large parts cannot be machined at all.
Moreover, the ultra-fast metal engraving machine looks more like a huge metal box with three mechanical arms, and then there is a function that can adjust the size, and there is a set of various cutter heads in large numbers.
Looking at these three robotic arms, it seems to be telescopic and adjustable.
Anyone who knows the principles of mechanics knows that the robotic arm can be telescopic and can process large and small parts. There is no machine tool that is too small to process large parts.
only……
Everyone frowned.
High-precision machine tools focus on high precision. No matter how stable the mechanical arm is, the accuracy of the parts processed will be limited.
The mechanical arm will involve a transmission device. During the transmission operation, vibrations will be generated, etc., resulting in almost no way to guarantee accuracy. The machined parts have no precision at all.
"Is this an engraving machine that can process curb stones?",
"It doesn't look like it?"
"Could it be a mistake?"
"It's so disappointing. It's so different from what I expected."
There were many people watching, and there was another discussion.
At this time, the place has been surrounded by three floors inside and three floors outside. People naturally like to join in the fun, so the more people there are, the more people are attracted to come here, and the place is completely surrounded.
People who didn't know were trying their best to get here again.
The effect is that you can't see inside at all, and many people just look around and inquire about it for no reason.
Such popularity naturally resulted in almost no one paying attention to other booths.
Several nearby manufacturers, mainly Shimakawa Heavy Industries, were so angry that they gritted their teeth. You must know that they were the protagonists in the past.
In front of Mammoth Heavy Industries’ booth.
A middle-aged man with a big belly and a beautiful secretary kept looking at the ultra-fast metal engraving machine and said loudly: "I am Lu Dasheng, the boss of Hesheng Group, please confirm that this is what you are going to launch. Super fast metal engraving machine?”
The people nearby exclaimed when they heard it was Hesheng Group.
"Hesheng Group is the second largest metal processing group in the country. I didn't expect Mr. Lu to come as well."
"It's really Mr. Lu."
Many people knew Lu Dasheng and quickly said hello.
Lu Dasheng responded with a smile, then looked at Jia Zhengchu and said, "Where is the product manual for this ultra-fast metal engraving machine? Give me a copy. As long as the performance meets the standards, I will still be happy to support domestic manufacturers."
"Mr. Lu is righteous."
Suddenly someone began to flatter me.
Lu Dasheng was very helpful.
Jia Zhengchu smiled lightly and said, "Mr. Lu, I'm so sorry, there really is no product manual."
"How does it perform?"
"Isn't there a metal processing competition later? It's a donkey or a horse. If you take it out for a walk, it will be clear."
"I believe that showing it through actual processing is more convincing than this product manual."
Lu Dasheng was not annoyed and said, "Yes, I am very confident in my products. I will just wait."
At this time, several muscular men squeezed through a passage in the crowd.
An islander walked in.
It was the mustache of Shimakawa Heavy Industries. He was smiling. He looked at the ultra-fast metal engraving machine in front of him with a look of astonishment on his face. Then, with contempt and disdain in his eyes, he laughed strangely, "This is Mammoth." Products from heavy industry?”
"Hahaha, just this little thing?"
"I have to say that your Eastern thinking is really whimsical. Using robotic arms for high-precision machining is really hilarious."
Many business owners present kept their mouths shut.
Shimakawa Heavy Industries' products are the mainstream of the market, and are used more or less in their factories, so naturally they can't offend Mustache.
What's more, they are also full of doubts.
Mammoth Heavy Industries should not make such a stupid mistake.
Robotic arms can indeed do countless jobs, but they definitely do not include high-precision machining.
Think about how much accuracy deviation will occur when the robotic arm is moving and transmitting?
The picture was so beautiful that they couldn't even imagine it.
Will a mirror-surface part turn into pits when processed?
Jia Zhengchu smiled lightly and said, "A gadget?"
He showed an unscrupulous look of contempt, pointed at Shimakawa Heavy Industries' booth, and said, "Then can I call you a bunch of scraps of metal stupid?"
"idiot."
Mustache was furious, and he said angrily: "You actually call our company's most advanced machine tools junk?"
"Hmph, if you put it in the east, this would be the most advanced equipment."
“I really don’t know the heights of the world.”
Jia Zhengchu had disdain on his face and said, "Why are you not convinced?"
"Why don't we make a bet? There won't be a processing competition soon? If we, Mammoth Heavy Industries, can't get the first place, how about we lose, even if we, Mammoth Heavy Industries, lose?"
"On the contrary, if we get first place, you will lose."
"The bet is only 100 million."
"Let me declare first that if Mammoth Heavy Industries wins, the 100 million will be donated to charity."
"What, Mustache, do you dare?"
The mustache hesitated for a moment, but nodded.
"make a deal."
One hundred million is just a small amount of money for a company like Shimakawa Heavy Industries, and he can still afford it.
In the eyes of Mustache, it was impossible for him to win this bet.
The other party is too arrogant.
If there was still a chance to win against Shimakawa Heavy Industries, the opponent insisted on taking first place.
In addition to Shimakawa Heavy Industries, there are also several world-famous companies here. Although their products are only second- and third-rate, they are enough to beat all their manufacturers in the East.
The Mammoth Heavy Industry in front of me is so arrogant. How dare you claim to win the first place?
Use robotic arms as a processing method to win against Shimakawa Heavy Industries in high precision?
Is the other person crazy?
This is obviously a gift of money, why not bet?
Jia Zhengchu immediately found the organizer of the exhibition and the two parties signed an agreement. This way, he would not be afraid of the other party going back on his word.
The organizers were also confused.
They also saw this ultra-fast metal engraving machine launched by Mammoth Heavy Industries.
To be honest, they were all shocked.
Isn't Mammoth Heavy Industries just joking about the exhibition, randomly finding a machine with a weird design, and coming to the exhibition to try to get orders?
Forget about being embarrassed.
Are you still betting now?
Isn’t that embarrassing enough?
"Manager Jia, don't you need to think about it?"
A director from the exhibition side looked at Jia Zhengchu with some displeasure.
If he had any scruples because it was Mammoth Heavy Industries, he would have kicked the person out of the exhibition by scolding his mother.
This kind of dissuasion is also for the sake of the exhibition's face and does not want to aggravate the matter.
Jia Zhengchu shook his head and said, "No need, I've thought about it clearly."
The director was also annoyed and quickly drafted an agreement.
Since they are no longer afraid of embarrassment, what does he have to fear?
As soon as the agreement was signed, it immediately caused a sensation.
Having held so many exhibitions, this time it was different because of Mammoth Heavy Industry's participation, which gave people a sense of passion.
This bet has attracted the attention of many people.
The media immediately put this bet on major website portals and public accounts. With the spread, countless netizens paid attention to this bet.
The short video platform gave traffic instantly, pushing this matter to a whole new level.
Especially with the appearance of a super-fast metal engraving machine, I don’t know how many people were stunned.
"Damn it, is Mammoth Heavy Industries overconfident?"
"It's not about beating Shimakawa Heavy Industries, but it's about taking first place."
"How confident is it to go straight to first place?"
"A machine tool processed with a robotic arm? It's so awesome, it's beyond my imagination."
"X, do you think this broken machine of yours is a black technology?"
"This is a global exhibition. This is so embarrassing. God knows how foreigners will laugh at us in the East this time."
There are also concerns. For example, Mammoth Heavy Industries does not know the strength of companies such as Shimokawa Heavy Industries, Reiter Heavy Industries, Erhard Corporation, and Damian Heavy Industries Group. These companies are among the top companies in the world. Together they can occupy More than 70% of the global machine tool market.
Mammoth Heavy Industries directly challenges them?
They admit that Mammoth Heavy Industry's autonomous driving technology is very strong, but with CNC machine tool technology, there is really no way to overtake in corners.
Domestic manufacturers have been working hard to catch up for many years, but they have always been able to play in the mid- to low-end. The high-end is always an unconquerable position. All the real profits flow into the hands of Europe, America and Japan.
Now Mammoth Heavy Industries wants to challenge them, can it?
Just this piece of crap in front of me?
No matter how you look at it, this ultra-fast metal engraving machine is just a mechanical toy compared with other machine tools and CNC centers that are full of mechanical flavor.
How to compare?
Even before the competition, we have already lost.
Some people even cursed Mammoth Heavy Industries for overestimating its capabilities and embarrassing the Orientals.
If you are not strong enough, just keep a low profile, study honestly, and strive to catch up with them as soon as possible.
Instead of acting like a clown and sensationalizing.
Amid this controversy, the metal processing competition of the Global Metal Processing Exhibition began.
