Reporter Li is also an experienced reporter, and he is piecing together all the clues in his mind——
Chen Xiao designed a motherboard that could replace the German Demagee five-axis machine tool. After getting it produced by Delong Company, it was installed on the CNC machine tool of Jiangcheng Machinery Factory. The machine tool ran perfectly.
Li Feng himself wrote a news report about Chen Xiao, but the editor rejected it.
The final report only mentioned that Jiangcheng Machinery Factory dared to innovate and contributed to the development of Xia Guo's CNC machine tool industry.
Li Feng didn't pay attention to what happened later. He was just a little regretful that Chen Xiao was not reported.
It wasn't until today that Li Feng knew that the technology for the new motherboard batch from Jiangcheng Machinery Factory had been sent to Zhongjing Company.
Zhongjing Company used this technology, coupled with chips and blades purchased from outside, to produce a domestic version of CNC machine tools.
The price of domestic CNC machine tools is of course much lower than that of overseas ones. Therefore, Zhongjing Company immediately stood out from the domestic equipment companies and had a large number of customers and a large number of orders within a period of time.
However, I did not expect that Zhongjing Company’s motherboard design seemed to be defective, which caused problems to occur in so many factories that purchased CNC machine tools at the same time.
Li Feng grasped the key points of the news immediately.
How did the technology clearly invented by Chen Xiao become the intellectual property of Zhongjing?
Did Zhongjing spend money to buy it?
Now, apart from the problem with the equipment, it was designed by Chen Xiao. What if there is any other reason?
After Li Feng interviewed here, he quickly contacted the Delonghi company that produced the first batch of motherboards to find out.
The people in charge of the factory were very emotional. After all, the losses were real. The factory with a relatively weak foundation may not be able to bear this wave.
Mr. Yao Yao Lin said: "I suggest that you go back and check whether you are controlling the CNC machine tools strictly in accordance with the operating requirements. How could there be problems with the newly produced CNC machine tools? And there were no problems when you tested the machine when you bought it!"
Yao Lin was already sweating profusely as he continued to defend Zhongjing.
What happened here has been reported to the leaders, and some actions have been taken from above. Reporters must be greeted first and not to report randomly. Other matters will be discussed when the leaders arrive.
Mr. Li from Guojian Company yelled: "Yao Lin, what you are talking about is bullshit! They are all domestically produced equipment with the same performance and functions. I bought one from Linghua, and it is tens of thousands of yuan more expensive than yours." , operates 24 hours a day, why is nothing happening!
Mr. Su said that Zhongjing's equipment is better than ADLINK's, has patents, provides after-sales service, and is cheaper, so I bought it! Now all the ones produced by Zhongjing are having problems, but the one purchased by ADLINK is still running! "
"They were all purchased at about the same time. Why is Ling Hua's fine and Zhong Jing's having an accident?"
When Mr. Li said this, many people remembered it.
During this period, there are some weird things in the production and sales of domestic precision equipment. ADLINK and Zhongjing launched domestic CNC machine tools almost at the same time, and the CNC machine tools are all the same model. What is going on.
At this time, Su Desheng received two calls.
One call was from his immediate boss, Zhang Biao.
Zhang Biao scolded Su Desheng, "All the equipment sold has motherboard problems. I just asked Jiangcheng Machinery Factory and the motherboards there were also burned! Su Desheng, what is going on!"
Zhang Biao: "The products sold this time involve millions. If something goes wrong, you will pay for it with your life!"
There is also a phone call from Yanjing.
"Hey, is this Su Qiao's father? I'm sorry to bother you. We are from the patent review expert team of the State Intellectual Property Office. Because the patent applicant Su Qiao left your phone number, we called you. .”
"The purpose of our call this time is to contact the patent applicant and Jiangcheng Machinery Factory to actually check the application of the patented product."
"We heard that Zhongjing Company has put the patent into practice and started production and sales. Let's take a look at it tomorrow."
Su Desheng swallowed his saliva and almost fainted.
…
When Chen Xiao came home from school, he filled a bowl of white rice with his favorite spicy pickled rice in front of him.
Jiangcheng's hotpot is quite famous, and almost every household can make it.
Eating this in the winter not only provides food but also keeps out the cold.
Chen Xiaofeng Can Yunjuan finished a bowl of rice and then went to fill another bowl.
Lin Hui put the stewed ribs in Chen Xiao's bowl and said, "Don't eat spicy food, eat more meat."
Chen Xiao nodded hurriedly, and at this time the phone rang.
Lin Hui went to answer the phone, "It's for you."
Chen Xiao wiped his mouth and just took the phone when Zhou Linghua's hearty laughter came from the other end of the phone.
"Hahaha! Brother Chen! What you expected was indeed correct. You bitch, Zhongjing is just stealing skills!"
Zhou Linghua said excitedly: "Now there is a problem at Zhongjing Company! Many CNC machine tools purchased by customers have burned their motherboards after intensive work. This incident has made noise throughout Jiangzhou! "
"Now the heads of seven or eight factories are surrounding the door of Zhongjing Company, demanding an explanation from Zhongjing Company! If Zhongjing refuses to agree, they will go to the government!"
Linghua Equipment Factory's CNC machine tools did not stop production during this period under Chen Xiao's suggestion, but very few were sold.
Some time ago, Zhou Linghua had trouble sleeping and eating, and he doubted countless times whether his cooperation with Chen Xiao was correct.
But after seeing the visual operating system developed by Chen Xiao, he convinced himself countless times that this young man was still somewhat capable.
it's good now! Everything was as Chen Xiao expected.
Zhongjing Company's equipment had serious problems, which resulted in a surge in orders for ADLINK equipment! Orders have now been taken until the middle of the year.
For those users who have purchased Zhongjing CNC machine tools, it is cost-effective to re-purchase ADLINK equipment even if the Zhongjing equipment fails.
After all, the price of foreign equipment is several times that of ADLINK and Zhongjing equipment.
Many users who were squeezed from product orders quickly approached Zhou Linghua to buy equipment, hoping to resume production as soon as possible.
If the order is delayed, the loss will be really huge.
Zhou Linghua said: "Xiaozi, I am going to contact Delong and start trying to produce CNC machine tools with visual operating systems. The number I promised you will never change! When you finish the college entrance examination, I will give you a guarantee A big red envelope!”
According to this momentum, Zhou Linghua is sure that sales will surge this year! The company's scale will also reach a new level.
Chen Xiao knew, however, that motherboards were only one of the core technologies. Key technologies such as chips and blades were in the hands of overseas companies, and Xia Guo's CNC machine tools were still unable to develop on a large scale.
There is a limit to ADLINK's development, and it may even be strangled by overseas capital.
However, what Ling Hua does is also good for Xia Guo Industry.
When overseas companies like DMG learn that the equipment assembled and produced in Xia Guo is so cheap, they will definitely try to build a production base for the equipment in Xia Guo, and the price of high-quality CNC machine tools will also be significantly reduced.
Chen Xiao was also very happy: "Congratulations, Mr. Zhou."
Zhou Linghua hurriedly said: "Why is Mr. Zhou not Mr. Zhou? Just call me Brother Hua when you are so out of touch. By the way, Xiaozi, you don't have a mobile phone now. It's too troublesome for me to contact you. I've already asked someone to buy one for you." I got a mobile phone and I’ll send it to you at school tomorrow.”
