Twenty days later.
The 1st Anhui Division and the 2nd Anhui Division have basically completed queue training and internal affairs training, and have gradually begun to focus their training on weapons maintenance, physical training, basic cultural courses, and ideological study.
This morning, Lu Xiaojia came to the school grounds for inspection as usual, but she saw a large number of soldiers gathered around during the break, which made her suspicious.
Taking a closer look, it turned out that it was Lin Yi from the teaching group who was personally teaching, carefully explaining to the recruits the reloading method and maintenance of the MG42 general machine gun...
Lu Xiaojia did not interrupt, but chose to quietly watch Lin Yi's teaching with the soldiers.
"Soldiers, we need to open the receiver cover and the magazine cover, then place the ammunition chain inside, cover the magazine cover and the receiver cover, and then pull the bolt back hard. In this way, the bolt will be behind the gun body, and then We can switch between safety, semi-automatic and fully automatic modes through the metal button on the machine gun grip."
"Now I will teach you how to replace the barrel. The MG42 general-purpose machine gun is not a water-cooled machine gun, so after shooting for a period of time, the barrel must be replaced."
"Remember to wear thick cotton gloves. We first pull the gun bolt back, and then take out the mechanism in the barrel. The mechanism is here. We have to push it forward and then push it back. Then the barrel will pop up automatically, and we will then remove the heat. Take out the barrel and replace it with a new normal temperature barrel."
Then Lin Yi began to explain carefully how to disassemble the MG42 general machine gun.
"First we remove the flash hider and vent gasket from the front of the machine gun, then push the harpoon to remove the bipod, and then push the bolt handle forward so that the bolt is ready to fire. Press and hold The small button on the butt rotates the butt. After taking off the butt, we pull the bolt back, and the bolt spring and bolt will automatically pop out, and we can take them out for oiling and maintenance..."
After reading Lin Yi's entire teaching process, I have to say that Lin Yi is very professional. Even Lu Xiaojia couldn't help but applaud along with the recruits.
"Pah! Pah! Pah!"
"Hahaha, Instructor Lin, you are teaching in person. This is a good spirit!"
Only then did everyone realize that Lu Xiaojia was standing at the end, and the soldiers sitting on the ground stood up and saluted.
"Master's seat!"
"Master's seat!"
…
Lu Xiaojia gave up. As a senior puppet army fan in his previous life, he suddenly wanted to show off his skills to the soldiers, so he smiled and said:
"Instructor Lin has explained to you the operation and maintenance methods of the MG42 machine gun. Now it's time for me to teach you."
"What, Master actually wants to teach us in person? Did I hear that right?"
"Okay! Brothers over there, come here quickly. We can watch the teacher's teaching here!"
…
Amid the cheers of the soldiers, soldiers from other formations also came to join in the fun. More and more people surrounded Lu Xiaojia, completely swamping Lu Xiaojia.
Lu Xiaojia did not panic about this. He first calmed down and briefly checked the structure of the STG44 assault rifle in his hand, then stood up and said:
"Soldiers, please watch carefully. Master, I will only demonstrate it to you once. Make sure you watch it carefully and learn it carefully. These skills are all useful."
After saying that, Lu Xiaojia began to explain the names of the various parts of the STG44 assault rifle to these soldiers while dismantling the STG44 assault rifle.
"We first need to pull the bolt, then check whether there is any remaining ammunition in the chamber, and then press the magazine release button to remove the magazine. Then pull out the metal pin that connects the butt to the gun body, and remove the magazine. The small grip is separated from the firing assembly. Then we remove the butt and recoil spring, pull the bolt and take out the bolt frame, and separate the bolt and bolt frame."
"Now we start to wipe the wooden parts of the firearm with linen cloth. For stains and mud, we can wipe it with a gun cloth dipped in water. For metal parts, we should wipe it with an oil cloth first, and then clean it with a clean and dry gun cloth. Wipe. As for cleaning the grooves, grooves, holes and gaps of the firearm, we can use a brush. When wiping the spring parts and barrel, put a cloth strip into them and rotate them to wipe."
